Export limit exceeded: 26239 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26239 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50886 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: toshsd: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, free_irq() also needs be called. | ||||
| CVE-2025-68310 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump Do not block PCI config accesses through pci_cfg_access_lock() when executing the s390 variant of PCI error recovery: Acquire just device_lock() instead of pci_dev_lock() as powerpc's EEH and generig PCI AER processing do. During error recovery testing a pair of tasks was reported to be hung: mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working INFO: task kmcheck:72 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000 Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<000000065256f572>] schedule_preempt_disabled+0x22/0x30 [<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8 [<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core] [<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core] [<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398 [<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0 INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000 Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<0000000652172e28>] pci_wait_cfg+0x80/0xe8 [<0000000652172f94>] pci_cfg_access_lock+0x74/0x88 [<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core] [<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core] [<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core] [<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168 [<0000000652513212>] devlink_health_report+0x19a/0x230 [<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core] No kernel log of the exact same error with an upstream kernel is available - but the very same deadlock situation can be constructed there, too: - task: kmcheck mlx5_unload_one() tries to acquire devlink lock while the PCI error recovery code has set pdev->block_cfg_access by way of pci_cfg_access_lock() - task: kworker mlx5_crdump_collect() tries to set block_cfg_access through pci_cfg_access_lock() while devlink_health_report() had acquired the devlink lock. A similar deadlock situation can be reproduced by requesting a crdump with > devlink health dump show pci/<BDF> reporter fw_fatal while PCI error recovery is executed on the same <BDF> physical function by mlx5_core's pci_error_handlers. On s390 this can be injected with > zpcictl --reset-fw <BDF> Tests with this patch failed to reproduce that second deadlock situation, the devlink command is rejected with "kernel answers: Permission denied" - and we get a kernel log message of: mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5 because the config read of VSC_SEMAPHORE is rejected by the underlying hardware. Two prior attempts to address this issue have been discussed and ultimately rejected [see link], with the primary argument that s390's implementation of PCI error recovery is imposing restrictions that neither powerpc's EEH nor PCI AER handling need. Tests show that PCI error recovery on s390 is running to completion even without blocking access to PCI config space. | ||||
| CVE-2025-68199 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: codetag: debug: handle existing CODETAG_EMPTY in mark_objexts_empty for slabobj_ext When alloc_slab_obj_exts() fails and then later succeeds in allocating a slab extension vector, it calls handle_failed_objexts_alloc() to mark all objects in the vector as empty. As a result all objects in this slab (slabA) will have their extensions set to CODETAG_EMPTY. Later on if this slabA is used to allocate a slabobj_ext vector for another slab (slabB), we end up with the slabB->obj_exts pointing to a slabobj_ext vector that itself has a non-NULL slabobj_ext equal to CODETAG_EMPTY. When slabB gets freed, free_slab_obj_exts() is called to free slabB->obj_exts vector. free_slab_obj_exts() calls mark_objexts_empty(slabB->obj_exts) which will generate a warning because it expects slabobj_ext vectors to have a NULL obj_ext, not CODETAG_EMPTY. Modify mark_objexts_empty() to skip the warning and setting the obj_ext value if it's already set to CODETAG_EMPTY. To quickly detect this WARN, I modified the code from WARN_ON(slab_exts[offs].ref.ct) to BUG_ON(slab_exts[offs].ref.ct == 1); We then obtained this message: [21630.898561] ------------[ cut here ]------------ [21630.898596] kernel BUG at mm/slub.c:2050! [21630.898611] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [21630.900372] Modules linked in: squashfs isofs vfio_iommu_type1 vhost_vsock vfio vhost_net vmw_vsock_virtio_transport_common vhost tap vhost_iotlb iommufd vsock binfmt_misc nfsv3 nfs_acl nfs lockd grace netfs tls rds dns_resolver tun brd overlay ntfs3 exfat btrfs blake2b_generic xor xor_neon raid6_pq loop sctp ip6_udp_tunnel udp_tunnel nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables rfkill ip_set sunrpc vfat fat joydev sg sch_fq_codel nfnetlink virtio_gpu sr_mod cdrom drm_client_lib virtio_dma_buf drm_shmem_helper drm_kms_helper drm ghash_ce backlight virtio_net virtio_blk virtio_scsi net_failover virtio_console failover virtio_mmio dm_mirror dm_region_hash dm_log dm_multipath dm_mod fuse i2c_dev virtio_pci virtio_pci_legacy_dev virtio_pci_modern_dev virtio virtio_ring autofs4 aes_neon_bs aes_ce_blk [last unloaded: hwpoison_inject] [21630.909177] CPU: 3 UID: 0 PID: 3787 Comm: kylin-process-m Kdump: loaded Tainted: G W 6.18.0-rc1+ #74 PREEMPT(voluntary) [21630.910495] Tainted: [W]=WARN [21630.910867] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 [21630.911625] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [21630.912392] pc : __free_slab+0x228/0x250 [21630.912868] lr : __free_slab+0x18c/0x250[21630.913334] sp : ffff8000a02f73e0 [21630.913830] x29: ffff8000a02f73e0 x28: fffffdffc43fc800 x27: ffff0000c0011c40 [21630.914677] x26: ffff0000c000cac0 x25: ffff00010fe5e5f0 x24: ffff000102199b40 [21630.915469] x23: 0000000000000003 x22: 0000000000000003 x21: ffff0000c0011c40 [21630.916259] x20: fffffdffc4086600 x19: fffffdffc43fc800 x18: 0000000000000000 [21630.917048] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [21630.917837] x14: 0000000000000000 x13: 0000000000000000 x12: ffff70001405ee66 [21630.918640] x11: 1ffff0001405ee65 x10: ffff70001405ee65 x9 : ffff800080a295dc [21630.919442] x8 : ffff8000a02f7330 x7 : 0000000000000000 x6 : 0000000000003000 [21630.920232] x5 : 0000000024924925 x4 : 0000000000000001 x3 : 0000000000000007 [21630.921021] x2 : 0000000000001b40 x1 : 000000000000001f x0 : 0000000000000001 [21630.921810] Call trace: [21630.922130] __free_slab+0x228/0x250 (P) [21630.922669] free_slab+0x38/0x118 [21630.923079] free_to_partial_list+0x1d4/0x340 [21630.923591] __slab_free+0x24c/0x348 [21630.924024] ___cache_free+0xf0/0x110 [21630.924468] qlist_free_all+0x78/0x130 [21630.924922] kasan_quarantine_reduce+0x11 ---truncated--- | ||||
| CVE-2025-11546 | 2 Linux, Nec | 5 Linux, Clusterpro X, Clusterpro X Singleserversafe and 2 more | 2026-04-15 | N/A |
| CLUSTERPRO X for Linux 4.0, 4.1, 4.2, 5.0, 5.1 and 5.2 and EXPRESSCLUSTER X for Linux 4.0, 4.1, 4.2, 5.0, 5.1 and 5.2, CLUSTERPRO X SingleServerSafe for Linux 4.0, 4.1, 4.2, 5.0, 5.1 and 5.2, EXPRESSCLUSTER X SingleServerSafe for Linux 4.0, 4.1, 4.2, 5.0, 5.1 and 5.2 allows an attacker sends specially crafted network packets to the product, arbitrary OS commands may be executed without authentication. | ||||
| CVE-2023-54170 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: keys: Fix linking a duplicate key to a keyring's assoc_array When making a DNS query inside the kernel using dns_query(), the request code can in rare cases end up creating a duplicate index key in the assoc_array of the destination keyring. It is eventually found by a BUG_ON() check in the assoc_array implementation and results in a crash. Example report: [2158499.700025] kernel BUG at ../lib/assoc_array.c:652! [2158499.700039] invalid opcode: 0000 [#1] SMP PTI [2158499.700065] CPU: 3 PID: 31985 Comm: kworker/3:1 Kdump: loaded Not tainted 5.3.18-150300.59.90-default #1 SLE15-SP3 [2158499.700096] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [2158499.700351] Workqueue: cifsiod cifs_resolve_server [cifs] [2158499.700380] RIP: 0010:assoc_array_insert+0x85f/0xa40 [2158499.700401] Code: ff 74 2b 48 8b 3b 49 8b 45 18 4c 89 e6 48 83 e7 fe e8 95 ec 74 00 3b 45 88 7d db 85 c0 79 d4 0f 0b 0f 0b 0f 0b e8 41 f2 be ff <0f> 0b 0f 0b 81 7d 88 ff ff ff 7f 4c 89 eb 4c 8b ad 58 ff ff ff 0f [2158499.700448] RSP: 0018:ffffc0bd6187faf0 EFLAGS: 00010282 [2158499.700470] RAX: ffff9f1ea7da2fe8 RBX: ffff9f1ea7da2fc1 RCX: 0000000000000005 [2158499.700492] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [2158499.700515] RBP: ffffc0bd6187fbb0 R08: ffff9f185faf1100 R09: 0000000000000000 [2158499.700538] R10: ffff9f1ea7da2cc0 R11: 000000005ed8cec8 R12: ffffc0bd6187fc28 [2158499.700561] R13: ffff9f15feb8d000 R14: ffff9f1ea7da2fc0 R15: ffff9f168dc0d740 [2158499.700585] FS: 0000000000000000(0000) GS:ffff9f185fac0000(0000) knlGS:0000000000000000 [2158499.700610] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2158499.700630] CR2: 00007fdd94fca238 CR3: 0000000809d8c006 CR4: 00000000003706e0 [2158499.700702] Call Trace: [2158499.700741] ? key_alloc+0x447/0x4b0 [2158499.700768] ? __key_link_begin+0x43/0xa0 [2158499.700790] __key_link_begin+0x43/0xa0 [2158499.700814] request_key_and_link+0x2c7/0x730 [2158499.700847] ? dns_resolver_read+0x20/0x20 [dns_resolver] [2158499.700873] ? key_default_cmp+0x20/0x20 [2158499.700898] request_key_tag+0x43/0xa0 [2158499.700926] dns_query+0x114/0x2ca [dns_resolver] [2158499.701127] dns_resolve_server_name_to_ip+0x194/0x310 [cifs] [2158499.701164] ? scnprintf+0x49/0x90 [2158499.701190] ? __switch_to_asm+0x40/0x70 [2158499.701211] ? __switch_to_asm+0x34/0x70 [2158499.701405] reconn_set_ipaddr_from_hostname+0x81/0x2a0 [cifs] [2158499.701603] cifs_resolve_server+0x4b/0xd0 [cifs] [2158499.701632] process_one_work+0x1f8/0x3e0 [2158499.701658] worker_thread+0x2d/0x3f0 [2158499.701682] ? process_one_work+0x3e0/0x3e0 [2158499.701703] kthread+0x10d/0x130 [2158499.701723] ? kthread_park+0xb0/0xb0 [2158499.701746] ret_from_fork+0x1f/0x40 The situation occurs as follows: * Some kernel facility invokes dns_query() to resolve a hostname, for example, "abcdef". The function registers its global DNS resolver cache as current->cred.thread_keyring and passes the query to request_key_net() -> request_key_tag() -> request_key_and_link(). * Function request_key_and_link() creates a keyring_search_context object. Its match_data.cmp method gets set via a call to type->match_preparse() (resolves to dns_resolver_match_preparse()) to dns_resolver_cmp(). * Function request_key_and_link() continues and invokes search_process_keyrings_rcu() which returns that a given key was not found. The control is then passed to request_key_and_link() -> construct_alloc_key(). * Concurrently to that, a second task similarly makes a DNS query for "abcdef." and its result gets inserted into the DNS resolver cache. * Back on the first task, function construct_alloc_key() first runs __key_link_begin() to determine an assoc_array_edit operation to insert a new key. Index keys in the array are compared exactly as-is, using keyring_compare_object(). The operation ---truncated--- | ||||
| CVE-2022-50845 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix inode leak in ext4_xattr_inode_create() on an error path There is issue as follows when do setxattr with inject fault: [localhost]# fsck.ext4 -fn /dev/sda e2fsck 1.46.6-rc1 (12-Sep-2022) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Unattached zero-length inode 15. Clear? no Unattached inode 15 Connect to /lost+found? no Pass 5: Checking group summary information /dev/sda: ********** WARNING: Filesystem still has errors ********** /dev/sda: 15/655360 files (0.0% non-contiguous), 66755/2621440 blocks This occurs in 'ext4_xattr_inode_create()'. If 'ext4_mark_inode_dirty()' fails, dropping i_nlink of the inode is needed. Or will lead to inode leak. | ||||
| CVE-2023-53863 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netlink: do not hard code device address lenth in fdb dumps syzbot reports that some netdev devices do not have a six bytes address [1] Replace ETH_ALEN by dev->addr_len. [1] (Case of a device where dev->addr_len = 4) BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copyout+0xb8/0x100 lib/iov_iter.c:169 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copyout+0xb8/0x100 lib/iov_iter.c:169 _copy_to_iter+0x6d8/0x1d00 lib/iov_iter.c:536 copy_to_iter include/linux/uio.h:206 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:513 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:527 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] netlink_recvmsg+0x4ae/0x15a0 net/netlink/af_netlink.c:1970 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg net/socket.c:1040 [inline] ____sys_recvmsg+0x283/0x7f0 net/socket.c:2722 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: __nla_put lib/nlattr.c:1009 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1067 nlmsg_populate_fdb_fill+0x2b8/0x600 net/core/rtnetlink.c:4071 nlmsg_populate_fdb net/core/rtnetlink.c:4418 [inline] ndo_dflt_fdb_dump+0x616/0x840 net/core/rtnetlink.c:4456 rtnl_fdb_dump+0x14ff/0x1fc0 net/core/rtnetlink.c:4629 netlink_dump+0x9d1/0x1310 net/netlink/af_netlink.c:2268 netlink_recvmsg+0xc5c/0x15a0 net/netlink/af_netlink.c:1995 sock_recvmsg_nosec+0x7a/0x120 net/socket.c:1019 ____sys_recvmsg+0x664/0x7f0 net/socket.c:2720 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:716 slab_alloc_node mm/slub.c:3451 [inline] __kmem_cache_alloc_node+0x4ff/0x8b0 mm/slub.c:3490 kmalloc_trace+0x51/0x200 mm/slab_common.c:1057 kmalloc include/linux/slab.h:559 [inline] __hw_addr_create net/core/dev_addr_lists.c:60 [inline] __hw_addr_add_ex+0x2e5/0x9e0 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:867 [inline] dev_mc_add+0x9a/0x130 net/core/dev_addr_lists.c:885 igmp6_group_added+0x267/0xbc0 net/ipv6/mcast.c:680 ipv6_mc_up+0x296/0x3b0 net/ipv6/mcast.c:2754 ipv6_mc_remap+0x1e/0x30 net/ipv6/mcast.c:2708 addrconf_type_change net/ipv6/addrconf.c:3731 [inline] addrconf_notify+0x4d3/0x1d90 net/ipv6/addrconf.c:3699 notifier_call_chain kernel/notifier.c:93 [inline] raw_notifier_call_chain+0xe4/0x430 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1935 [inline] call_netdevice_notifiers_extack net/core/dev.c:1973 [inline] call_netdevice_notifiers+0x1ee/0x2d0 net/core/dev.c:1987 bond_enslave+0xccd/0x53f0 drivers/net/bonding/bond_main.c:1906 do_set_master net/core/rtnetlink.c:2626 [inline] rtnl_newlink_create net/core/rtnetlink.c:3460 [inline] __rtnl_newlink net/core/rtnetlink.c:3660 [inline] rtnl_newlink+0x378c/0x40e0 net/core/rtnetlink.c:3673 rtnetlink_rcv_msg+0x16a6/0x1840 net/core/rtnetlink.c:6395 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf28/0x1230 net/netlink/af_ ---truncated--- | ||||
| CVE-2023-54177 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: quota: fix warning in dqgrab() There's issue as follows when do fault injection: WARNING: CPU: 1 PID: 14870 at include/linux/quotaops.h:51 dquot_disable+0x13b7/0x18c0 Modules linked in: CPU: 1 PID: 14870 Comm: fsconfig Not tainted 6.3.0-next-20230505-00006-g5107a9c821af-dirty #541 RIP: 0010:dquot_disable+0x13b7/0x18c0 RSP: 0018:ffffc9000acc79e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88825e41b980 RDX: 0000000000000000 RSI: ffff88825e41b980 RDI: 0000000000000002 RBP: ffff888179f68000 R08: ffffffff82087ca7 R09: 0000000000000000 R10: 0000000000000001 R11: ffffed102f3ed026 R12: ffff888179f68130 R13: ffff888179f68110 R14: dffffc0000000000 R15: ffff888179f68118 FS: 00007f450a073740(0000) GS:ffff88882fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe96f2efd8 CR3: 000000025c8ad000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dquot_load_quota_sb+0xd53/0x1060 dquot_resume+0x172/0x230 ext4_reconfigure+0x1dc6/0x27b0 reconfigure_super+0x515/0xa90 __x64_sys_fsconfig+0xb19/0xd20 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Above issue may happens as follows: ProcessA ProcessB ProcessC sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_suspend -> suspend all type quota sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_resume ret = dquot_load_quota_sb add_dquot_ref do_open -> open file O_RDWR vfs_open do_dentry_open get_write_access atomic_inc_unless_negative(&inode->i_writecount) ext4_file_open dquot_file_open dquot_initialize __dquot_initialize dqget atomic_inc(&dquot->dq_count); __dquot_initialize __dquot_initialize dqget if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) ext4_acquire_dquot -> Return error DQ_ACTIVE_B flag isn't set dquot_disable invalidate_dquots if (atomic_read(&dquot->dq_count)) dqgrab WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) -> Trigger warning In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when dqgrab(). To solve above issue just replace the dqgrab() use in invalidate_dquots() with atomic_inc(&dquot->dq_count). | ||||
| CVE-2023-54180 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: handle case when repair happens with dev-replace [BUG] There is a bug report that a BUG_ON() in btrfs_repair_io_failure() (originally repair_io_failure() in v6.0 kernel) got triggered when replacing a unreliable disk: BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3 kernel BUG at fs/btrfs/extent_io.c:2380! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2 Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs] Call Trace: <TASK> clean_io_failure+0x14d/0x180 [btrfs] end_bio_extent_readpage+0x412/0x6e0 [btrfs] ? __switch_to+0x106/0x420 process_one_work+0x1c7/0x380 worker_thread+0x4d/0x380 ? rescuer_thread+0x3a0/0x3a0 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 [CAUSE] Before the BUG_ON(), we got some read errors from the replace target first, note the mirror number (3, which is beyond RAID1 duplication, thus it's read from the replace target device). Then at the BUG_ON() location, we are trying to writeback the repaired sectors back the failed device. The check looks like this: ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical, &map_length, &bioc, mirror_num); if (ret) goto out_counter_dec; BUG_ON(mirror_num != bioc->mirror_num); But inside btrfs_map_block(), we can modify bioc->mirror_num especially for dev-replace: if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 && !need_full_stripe(op) && dev_replace->tgtdev != NULL) { ret = get_extra_mirror_from_replace(fs_info, logical, *length, dev_replace->srcdev->devid, &mirror_num, &physical_to_patch_in_first_stripe); patch_the_first_stripe_for_dev_replace = 1; } Thus if we're repairing the replace target device, we're going to trigger that BUG_ON(). But in reality, the read failure from the replace target device may be that, our replace hasn't reached the range we're reading, thus we're reading garbage, but with replace running, the range would be properly filled later. Thus in that case, we don't need to do anything but let the replace routine to handle it. [FIX] Instead of a BUG_ON(), just skip the repair if we're repairing the device replace target device. | ||||
| CVE-2023-54189 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. | ||||
| CVE-2023-54191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit Always purge mcu skb queues in mt7996_mcu_exit routine even if mt7996_firmware_state fails. | ||||
| CVE-2023-54192 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block We got a kernel panic if old_addr is NULL. https://bugzilla.kernel.org/show_bug.cgi?id=217266 BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> f2fs_commit_atomic_write+0x619/0x990 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43] __f2fs_ioctl+0xd8e/0x4080 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43] ? vfs_write+0x2ae/0x3f0 ? vfs_write+0x2ae/0x3f0 __x64_sys_ioctl+0x91/0xd0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f69095fe53f | ||||
| CVE-2023-54211 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix warning in trace_buffered_event_disable() Warning happened in trace_buffered_event_disable() at WARN_ON_ONCE(!trace_buffered_event_ref) Call Trace: ? __warn+0xa5/0x1b0 ? trace_buffered_event_disable+0x189/0x1b0 __ftrace_event_enable_disable+0x19e/0x3e0 free_probe_data+0x3b/0xa0 unregister_ftrace_function_probe_func+0x6b8/0x800 event_enable_func+0x2f0/0x3d0 ftrace_process_regex.isra.0+0x12d/0x1b0 ftrace_filter_write+0xe6/0x140 vfs_write+0x1c9/0x6f0 [...] The cause of the warning is in __ftrace_event_enable_disable(), trace_buffered_event_enable() was called once while trace_buffered_event_disable() was called twice. Reproduction script show as below, for analysis, see the comments: ``` #!/bin/bash cd /sys/kernel/tracing/ # 1. Register a 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was set; # 2) trace_buffered_event_enable() was called first time; echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter # 2. Enable the event registered, then: # 1) SOFT_DISABLED_BIT was cleared; # 2) trace_buffered_event_disable() was called first time; echo 1 > events/initcall/initcall_finish/enable # 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was # set again!!! cat /proc/cmdline # 4. Unregister the 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was cleared again; # 2) trace_buffered_event_disable() was called second time!!! echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter ``` To fix it, IIUC, we can change to call trace_buffered_event_enable() at fist time soft-mode enabled, and call trace_buffered_event_disable() at last time soft-mode disabled. | ||||
| CVE-2023-53994 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ionic: remove WARN_ON to prevent panic_on_warn Remove unnecessary early code development check and the WARN_ON that it uses. The irq alloc and free paths have long been cleaned up and this check shouldn't have stuck around so long. | ||||
| CVE-2025-9055 | 3 Axis, Axis Communications Ab, Linux | 3 Axis Os, Axis Os, Linux | 2026-04-15 | 6.4 Medium |
| The VAPIX Edge storage API that allowed a privilege escalation, enabling a VAPIX administrator-privileged user to gain Linux Root privileges. This flaw can only be exploited after authenticating with an administrator-privileged service account. | ||||
| CVE-2025-40351 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix KMSAN uninit-value issue in hfsplus_delete_cat() The syzbot reported issue in hfsplus_delete_cat(): [ 70.682285][ T9333] ===================================================== [ 70.682943][ T9333] BUG: KMSAN: uninit-value in hfsplus_subfolders_dec+0x1d7/0x220 [ 70.683640][ T9333] hfsplus_subfolders_dec+0x1d7/0x220 [ 70.684141][ T9333] hfsplus_delete_cat+0x105d/0x12b0 [ 70.684621][ T9333] hfsplus_rmdir+0x13d/0x310 [ 70.685048][ T9333] vfs_rmdir+0x5ba/0x810 [ 70.685447][ T9333] do_rmdir+0x964/0xea0 [ 70.685833][ T9333] __x64_sys_rmdir+0x71/0xb0 [ 70.686260][ T9333] x64_sys_call+0xcd8/0x3cf0 [ 70.686695][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.687119][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.687646][ T9333] [ 70.687856][ T9333] Uninit was stored to memory at: [ 70.688311][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0 [ 70.688779][ T9333] hfsplus_create_cat+0x148e/0x1800 [ 70.689231][ T9333] hfsplus_mknod+0x27f/0x600 [ 70.689730][ T9333] hfsplus_mkdir+0x5a/0x70 [ 70.690146][ T9333] vfs_mkdir+0x483/0x7a0 [ 70.690545][ T9333] do_mkdirat+0x3f2/0xd30 [ 70.690944][ T9333] __x64_sys_mkdir+0x9a/0xf0 [ 70.691380][ T9333] x64_sys_call+0x2f89/0x3cf0 [ 70.691816][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.692229][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.692773][ T9333] [ 70.692990][ T9333] Uninit was stored to memory at: [ 70.693469][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0 [ 70.693960][ T9333] hfsplus_create_cat+0x148e/0x1800 [ 70.694438][ T9333] hfsplus_fill_super+0x21c1/0x2700 [ 70.694911][ T9333] mount_bdev+0x37b/0x530 [ 70.695320][ T9333] hfsplus_mount+0x4d/0x60 [ 70.695729][ T9333] legacy_get_tree+0x113/0x2c0 [ 70.696167][ T9333] vfs_get_tree+0xb3/0x5c0 [ 70.696588][ T9333] do_new_mount+0x73e/0x1630 [ 70.697013][ T9333] path_mount+0x6e3/0x1eb0 [ 70.697425][ T9333] __se_sys_mount+0x733/0x830 [ 70.697857][ T9333] __x64_sys_mount+0xe4/0x150 [ 70.698269][ T9333] x64_sys_call+0x2691/0x3cf0 [ 70.698704][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.699117][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.699730][ T9333] [ 70.699946][ T9333] Uninit was created at: [ 70.700378][ T9333] __alloc_pages_noprof+0x714/0xe60 [ 70.700843][ T9333] alloc_pages_mpol_noprof+0x2a2/0x9b0 [ 70.701331][ T9333] alloc_pages_noprof+0xf8/0x1f0 [ 70.701774][ T9333] allocate_slab+0x30e/0x1390 [ 70.702194][ T9333] ___slab_alloc+0x1049/0x33a0 [ 70.702635][ T9333] kmem_cache_alloc_lru_noprof+0x5ce/0xb20 [ 70.703153][ T9333] hfsplus_alloc_inode+0x5a/0xd0 [ 70.703598][ T9333] alloc_inode+0x82/0x490 [ 70.703984][ T9333] iget_locked+0x22e/0x1320 [ 70.704428][ T9333] hfsplus_iget+0x5c/0xba0 [ 70.704827][ T9333] hfsplus_btree_open+0x135/0x1dd0 [ 70.705291][ T9333] hfsplus_fill_super+0x1132/0x2700 [ 70.705776][ T9333] mount_bdev+0x37b/0x530 [ 70.706171][ T9333] hfsplus_mount+0x4d/0x60 [ 70.706579][ T9333] legacy_get_tree+0x113/0x2c0 [ 70.707019][ T9333] vfs_get_tree+0xb3/0x5c0 [ 70.707444][ T9333] do_new_mount+0x73e/0x1630 [ 70.707865][ T9333] path_mount+0x6e3/0x1eb0 [ 70.708270][ T9333] __se_sys_mount+0x733/0x830 [ 70.708711][ T9333] __x64_sys_mount+0xe4/0x150 [ 70.709158][ T9333] x64_sys_call+0x2691/0x3cf0 [ 70.709630][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.710053][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.710611][ T9333] [ 70.710842][ T9333] CPU: 3 UID: 0 PID: 9333 Comm: repro Not tainted 6.12.0-rc6-dirty #17 [ 70.711568][ T9333] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.712490][ T9333] ===================================================== [ 70.713085][ T9333] Disabling lock debugging due to kernel taint [ 70.713618][ T9333] Kernel panic - not syncing: kmsan.panic set ... [ 70.714159][ T9333] ---truncated--- | ||||
| CVE-2022-50564 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/netiucv: Fix return type of netiucv_tx() With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = netiucv_tx, ^~~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Additionally, while in the area, remove a comment block that is no longer relevant. | ||||
| CVE-2023-54222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id() The "map_sz" is the number of elements in the "m" array so the > comparison needs to be changed to >= to prevent an out of bounds read. | ||||
| CVE-2023-53745 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: um: vector: Fix memory leak in vector_config If the return value of the uml_parse_vector_ifspec function is NULL, we should call kfree(params) to prevent memory leak. | ||||
| CVE-2023-54225 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipa: only reset hashed tables when supported Last year, the code that manages GSI channel transactions switched from using spinlock-protected linked lists to using indexes into the ring buffer used for a channel. Recently, Google reported seeing transaction reference count underflows occasionally during shutdown. Doug Anderson found a way to reproduce the issue reliably, and bisected the issue to the commit that eliminated the linked lists and the lock. The root cause was ultimately determined to be related to unused transactions being committed as part of the modem shutdown cleanup activity. Unused transactions are not normally expected (except in error cases). The modem uses some ranges of IPA-resident memory, and whenever it shuts down we zero those ranges. In ipa_filter_reset_table() a transaction is allocated to zero modem filter table entries. If hashing is not supported, hashed table memory should not be zeroed. But currently nothing prevents that, and the result is an unused transaction. Something similar occurs when we zero routing table entries for the modem. By preventing any attempt to clear hashed tables when hashing is not supported, the reference count underflow is avoided in this case. Note that there likely remains an issue with properly freeing unused transactions (if they occur due to errors). This patch addresses only the underflows that Google originally reported. | ||||