Export limit exceeded: 26239 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26239 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40001 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work item completes before the mvs_info is deallocated. This bug was found by static analysis. | ||||
| CVE-2025-40059 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: Fix incorrect handling for return value of devm_kzalloc The return value of devm_kzalloc could be an null pointer, use "!desc.pdata" to fix incorrect handling return value of devm_kzalloc. | ||||
| CVE-2025-40115 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() During mpt3sas_transport_port_remove(), messages were logged with dev_printk() against &mpt3sas_port->port->dev. At this point the SAS transport device may already be partially unregistered or freed, leading to a crash when accessing its struct device. Using ioc_info(), which logs via the PCI device (ioc->pdev->dev), guaranteed to remain valid until driver removal. [83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI [83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary) [83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024 [83428.295799] RIP: 0010:__dev_printk+0x1f/0x70 [83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff [83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206 [83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32 [83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845 [83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8 [83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000 [83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30 [83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000 [83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0 [83428.295844] PKRU: 55555554 [83428.295846] Call Trace: [83428.295848] <TASK> [83428.295850] _dev_printk+0x5c/0x80 [83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas] [83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas] [83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas] [83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas] [83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas] [83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas] [83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas] [83428.295957] pci_device_remove+0x3b/0xb0 [83428.295962] device_release_driver_internal+0x193/0x200 [83428.295968] driver_detach+0x44/0x90 [83428.295971] bus_remove_driver+0x69/0xf0 [83428.295975] pci_unregister_driver+0x2a/0xb0 [83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas] [83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310 [83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296000] ? __x64_sys_getdents64+0x9a/0x110 [83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296009] ? syscall_trace_enter+0xf6/0x1b0 [83428.296014] do_syscall_64+0x7b/0x2c0 [83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-40116 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: host: max3421-hcd: Fix error pointer dereference in probe cleanup The kthread_run() function returns error pointers so the max3421_hcd->spi_thread pointer can be either error pointers or NULL. Check for both before dereferencing it. | ||||
| CVE-2025-40220 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix livelock in synchronous file put from fuseblk workers I observed a hang when running generic/323 against a fuseblk server. This test opens a file, initiates a lot of AIO writes to that file descriptor, and closes the file descriptor before the writes complete. Unsurprisingly, the AIO exerciser threads are mostly stuck waiting for responses from the fuseblk server: # cat /proc/372265/task/372313/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_do_getattr+0xfc/0x1f0 [fuse] [<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse] [<0>] aio_read+0x130/0x1e0 [<0>] io_submit_one+0x542/0x860 [<0>] __x64_sys_io_submit+0x98/0x1a0 [<0>] do_syscall_64+0x37/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 But the /weird/ part is that the fuseblk server threads are waiting for responses from itself: # cat /proc/372210/task/372232/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_file_put+0x9a/0xd0 [fuse] [<0>] fuse_release+0x36/0x50 [fuse] [<0>] __fput+0xec/0x2b0 [<0>] task_work_run+0x55/0x90 [<0>] syscall_exit_to_user_mode+0xe9/0x100 [<0>] do_syscall_64+0x43/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 The fuseblk server is fuse2fs so there's nothing all that exciting in the server itself. So why is the fuse server calling fuse_file_put? The commit message for the fstest sheds some light on that: "By closing the file descriptor before calling io_destroy, you pretty much guarantee that the last put on the ioctx will be done in interrupt context (during I/O completion). Aha. AIO fgets a new struct file from the fd when it queues the ioctx. The completion of the FUSE_WRITE command from userspace causes the fuse server to call the AIO completion function. The completion puts the struct file, queuing a delayed fput to the fuse server task. When the fuse server task returns to userspace, it has to run the delayed fput, which in the case of a fuseblk server, it does synchronously. Sending the FUSE_RELEASE command sychronously from fuse server threads is a bad idea because a client program can initiate enough simultaneous AIOs such that all the fuse server threads end up in delayed_fput, and now there aren't any threads left to handle the queued fuse commands. Fix this by only using asynchronous fputs when closing files, and leave a comment explaining why. | ||||
| CVE-2023-54260 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix lost destroy smbd connection when MR allocate failed If the MR allocate failed, the smb direct connection info is NULL, then smbd_destroy() will directly return, then the connection info will be leaked. Let's set the smb direct connection info to the server before call smbd_destroy(). | ||||
| CVE-2025-39995 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The following is the trace captured by KASAN. BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup. This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface. | ||||
| CVE-2025-40228 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: catch commit test ctx alloc failure Patch series "mm/damon/sysfs: fix commit test damon_ctx [de]allocation". DAMON sysfs interface dynamically allocates and uses a damon_ctx object for testing if given inputs for online DAMON parameters update is valid. The object is being used without an allocation failure check, and leaked when the test succeeds. Fix the two bugs. This patch (of 2): The damon_ctx for testing online DAMON parameters commit inputs is used without its allocation failure check. This could result in an invalid memory access. Fix it by directly returning an error when the allocation failed. | ||||
| CVE-2023-54279 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: fw: Allow firmware to pass a empty env fw_getenv will use env entry to determine style of env, however it is legal for firmware to just pass a empty list. Check if first entry exist before running strchr to avoid null pointer dereference. | ||||
| CVE-2025-40229 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme Currently, damon_destroy_scheme() only cleans up the filter list but leaves ops_filter untouched, which could lead to memory leaks when a scheme is destroyed. This patch ensures both filter and ops_filter are properly freed in damon_destroy_scheme(), preventing potential memory leaks. | ||||
| CVE-2025-40239 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: micrel: always set shared->phydev for LAN8814 Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP clock gets actually set, otherwise the function will return before setting it. This is an issue as shared->phydev is unconditionally being used when IRQ is being handled, especially in lan8814_gpio_process_cap and since it was not set it will cause a NULL pointer exception and crash the kernel. So, simply always set shared->phydev to avoid the NULL pointer exception. | ||||
| CVE-2025-40231 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vsock: fix lock inversion in vsock_assign_transport() Syzbot reported a potential lock inversion deadlock between vsock_register_mutex and sk_lock-AF_VSOCK when vsock_linger() is called. The issue was introduced by commit 687aa0c5581b ("vsock: Fix transport_* TOCTOU") which added vsock_register_mutex locking in vsock_assign_transport() around the transport->release() call, that can call vsock_linger(). vsock_assign_transport() can be called with sk_lock held. vsock_linger() calls sk_wait_event() that temporarily releases and re-acquires sk_lock. During this window, if another thread hold vsock_register_mutex while trying to acquire sk_lock, a circular dependency is created. Fix this by releasing vsock_register_mutex before calling transport->release() and vsock_deassign_transport(). This is safe because we don't need to hold vsock_register_mutex while releasing the old transport, and we ensure the new transport won't disappear by obtaining a module reference first via try_module_get(). | ||||
| CVE-2023-54281 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: release path before inode lookup during the ino lookup ioctl During the ino lookup ioctl we can end up calling btrfs_iget() to get an inode reference while we are holding on a root's btree. If btrfs_iget() needs to lookup the inode from the root's btree, because it's not currently loaded in memory, then it will need to lock another or the same path in the same root btree. This may result in a deadlock and trigger the following lockdep splat: WARNING: possible circular locking dependency detected 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0 Not tainted ------------------------------------------------------ syz-executor277/5012 is trying to acquire lock: ffff88802df41710 (btrfs-tree-01){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136 but task is already holding lock: ffff88802df418e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-tree-00){++++}-{3:3}: down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645 __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136 btrfs_search_slot+0x13a4/0x2f80 fs/btrfs/ctree.c:2302 btrfs_init_root_free_objectid+0x148/0x320 fs/btrfs/disk-io.c:4955 btrfs_init_fs_root fs/btrfs/disk-io.c:1128 [inline] btrfs_get_root_ref+0x5ae/0xae0 fs/btrfs/disk-io.c:1338 btrfs_get_fs_root fs/btrfs/disk-io.c:1390 [inline] open_ctree+0x29c8/0x3030 fs/btrfs/disk-io.c:3494 btrfs_fill_super+0x1c7/0x2f0 fs/btrfs/super.c:1154 btrfs_mount_root+0x7e0/0x910 fs/btrfs/super.c:1519 legacy_get_tree+0xef/0x190 fs/fs_context.c:611 vfs_get_tree+0x8c/0x270 fs/super.c:1519 fc_mount fs/namespace.c:1112 [inline] vfs_kern_mount+0xbc/0x150 fs/namespace.c:1142 btrfs_mount+0x39f/0xb50 fs/btrfs/super.c:1579 legacy_get_tree+0xef/0x190 fs/fs_context.c:611 vfs_get_tree+0x8c/0x270 fs/super.c:1519 do_new_mount+0x28f/0xae0 fs/namespace.c:3335 do_mount fs/namespace.c:3675 [inline] __do_sys_mount fs/namespace.c:3884 [inline] __se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (btrfs-tree-01){++++}-{3:3}: check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144 lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761 down_read_nested+0x49/0x2f0 kernel/locking/rwsem.c:1645 __btrfs_tree_read_lock+0x2f/0x220 fs/btrfs/locking.c:136 btrfs_tree_read_lock fs/btrfs/locking.c:142 [inline] btrfs_read_lock_root_node+0x292/0x3c0 fs/btrfs/locking.c:281 btrfs_search_slot_get_root fs/btrfs/ctree.c:1832 [inline] btrfs_search_slot+0x4ff/0x2f80 fs/btrfs/ctree.c:2154 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:412 btrfs_read_locked_inode fs/btrfs/inode.c:3892 [inline] btrfs_iget_path+0x2d9/0x1520 fs/btrfs/inode.c:5716 btrfs_search_path_in_tree_user fs/btrfs/ioctl.c:1961 [inline] btrfs_ioctl_ino_lookup_user+0x77a/0xf50 fs/btrfs/ioctl.c:2105 btrfs_ioctl+0xb0b/0xd40 fs/btrfs/ioctl.c:4683 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info ---truncated--- | ||||
| CVE-2025-40235 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots() If fs_info->super_copy or fs_info->super_for_commit allocated failed in btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info(). Otherwise btrfs_check_leaked_roots() would access NULL pointer because fs_info->allocated_roots had not been initialised. syzkaller reported the following information: ------------[ cut here ]------------ BUG: unable to handle page fault for address: fffffffffffffbb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 64c9067 P4D 64c9067 PUD 64cb067 PMD 0 Oops: Oops: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 1402 Comm: syz.1.35 Not tainted 6.15.8 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...) RIP: 0010:arch_atomic_read arch/x86/include/asm/atomic.h:23 [inline] RIP: 0010:raw_atomic_read include/linux/atomic/atomic-arch-fallback.h:457 [inline] RIP: 0010:atomic_read include/linux/atomic/atomic-instrumented.h:33 [inline] RIP: 0010:refcount_read include/linux/refcount.h:170 [inline] RIP: 0010:btrfs_check_leaked_roots+0x18f/0x2c0 fs/btrfs/disk-io.c:1230 [...] Call Trace: <TASK> btrfs_free_fs_info+0x310/0x410 fs/btrfs/disk-io.c:1280 btrfs_get_tree_subvol+0x592/0x6b0 fs/btrfs/super.c:2029 btrfs_get_tree+0x63/0x80 fs/btrfs/super.c:2097 vfs_get_tree+0x98/0x320 fs/super.c:1759 do_new_mount+0x357/0x660 fs/namespace.c:3899 path_mount+0x716/0x19c0 fs/namespace.c:4226 do_mount fs/namespace.c:4239 [inline] __do_sys_mount fs/namespace.c:4450 [inline] __se_sys_mount fs/namespace.c:4427 [inline] __x64_sys_mount+0x28c/0x310 fs/namespace.c:4427 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x92/0x180 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f032eaffa8d [...] | ||||
| CVE-2025-43079 | 3 Linux, Qualys, Qualys Inc | 4 Linux, Cloud Agent, Cloud Agent For Linux and 1 more | 2026-04-15 | 6.3 Medium |
| The Qualys Cloud Agent included a bundled uninstall script (qagent_uninstall.sh), specific to Mac and Linux supported versions that invoked multiple system commands without using absolute paths and without sanitizing the $PATH environment. If the uninstall script is executed with elevated privileges (e.g., via sudo) in an environment where $PATH has been manipulated, an attacker with root/sudo privileges could cause malicious executables to be run in place of the intended system binaries. This behavior can be leveraged for local privilege escalation and arbitrary command execution under elevated privileges. | ||||
| CVE-2022-50852 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix use after free in mt7921_acpi_read() Don't dereference "sar_root" after it has been freed. | ||||
| CVE-2025-71069 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: invalidate dentry cache on failed whiteout creation F2FS can mount filesystems with corrupted directory depth values that get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT operations are performed on such directories, f2fs_rename performs directory modifications (updating target entry and deleting source entry) before attempting to add the whiteout entry via f2fs_add_link. If f2fs_add_link fails due to the corrupted directory structure, the function returns an error to VFS, but the partial directory modifications have already been committed to disk. VFS assumes the entire rename operation failed and does not update the dentry cache, leaving stale mappings. In the error path, VFS does not call d_move() to update the dentry cache. This results in new_dentry still pointing to the old inode (new_inode) which has already had its i_nlink decremented to zero. The stale cache causes subsequent operations to incorrectly reference the freed inode. This causes subsequent operations to use cached dentry information that no longer matches the on-disk state. When a second rename targets the same entry, VFS attempts to decrement i_nlink on the stale inode, which may already have i_nlink=0, triggering a WARNING in drop_nlink(). Example sequence: 1. First rename (RENAME_WHITEOUT): file2 → file1 - f2fs updates file1 entry on disk (points to inode 8) - f2fs deletes file2 entry on disk - f2fs_add_link(whiteout) fails (corrupted directory) - Returns error to VFS - VFS does not call d_move() due to error - VFS cache still has: file1 → inode 7 (stale!) - inode 7 has i_nlink=0 (already decremented) 2. Second rename: file3 → file1 - VFS uses stale cache: file1 → inode 7 - Tries to drop_nlink on inode 7 (i_nlink already 0) - WARNING in drop_nlink() Fix this by explicitly invalidating old_dentry and new_dentry when f2fs_add_link fails during whiteout creation. This forces VFS to refresh from disk on subsequent operations, ensuring cache consistency even when the rename partially succeeds. Reproducer: 1. Mount F2FS image with corrupted i_current_depth 2. renameat2(file2, file1, RENAME_WHITEOUT) 3. renameat2(file3, file1, 0) 4. System triggers WARNING in drop_nlink() | ||||
| CVE-2025-71067 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: set dummy blocksize to read boot_block when mounting When mounting, sb->s_blocksize is used to read the boot_block without being defined or validated. Set a dummy blocksize before attempting to read the boot_block. The issue can be triggered with the following syz reproducer: mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0) r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0) ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000) mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00', &(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0) syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0) Here, the ioctl sets the bdev block size to 16384. During mount, get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)), but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leaves sb->s_blocksize at zero. Later, ntfs_init_from_boot() attempts to read the boot_block while sb->s_blocksize is still zero, which triggers the bug. [almaz.alexandrovich@paragon-software.com: changed comment style, added return value handling] | ||||
| CVE-2023-54244 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: Fix oops when removing custom query handlers When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi | ||||
| CVE-2023-54301 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix leak in `brcmuart_probe` Smatch reports: drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn: 'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032. The issue is fixed by using a managed clock. | ||||