Export limit exceeded: 394432 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (394432 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46151 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix heap leak in IEEE 1284 device ID via short response usblp_ctrl_msg() collapses the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. A broken printer can complete the GET_DEVICE_ID control transfer short and the driver has no way to know. usblp_cache_device_id_string() reads the 2-byte big-endian length prefix from the response and trusts it (clamped only to the buffer bounds). The buffer is kmalloc(1024) at probe time. A device that sends exactly two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves device_id_string[2..1022] holding stale kmalloc heap. That stale data is then exposed: - via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated at the first NUL in the stale heap), and - via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full claimed length regardless of NULs, up to 1021 bytes of uninitialized heap, with the leak size chosen by the device. Fix this up by just zapping the buffer with zeros before each request sent to the device. | ||||
| CVE-2026-46150 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fanotify: fix false positive on permission events fsnotify_get_mark_safe() may return false for a mark on an unrelated group, which results in bypassing the permission check. Fix by skipping over detached marks that are not in the current group. | ||||
| CVE-2026-46149 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show() target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a 256-byte stack buffer, then will memcpy() cur_len bytes from that buffer. snprintf() returns the length the output would have had, which can exceed the buffer size when the fabric WWN is long because iSCSI IQN names can be up to 223 bytes. The check at the memcpy() site only guards the destination page write, not the source read, so memcpy() will read past the stack buffer and copy adjacent stack contents to the sysfs reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic() will be triggered. Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length check to avoid buffer overflow") added the same bound to the target_lu_gp_members_show() but the tg_pt_gp variant was missed so resolve that here. | ||||
| CVE-2026-46146 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3() The convert_chmap_v3() has a loop with its increment size of cs_desc->wLength, but we forgot to validate cs_desc->wLength itself, which may lead to potential endless loop by a malformed descriptor. Add a proper size check to abort the loop for plugging the hole. | ||||
| CVE-2026-46137 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: fix potential data-race This mptcp_pm_add_timer() helper is executed as a timer callback in softirq context. To avoid any data races, the socket lock needs to be held with bh_lock_sock(). If the socket is in use, retry again soon after, similar to what is done with the keepalive timer. | ||||
| CVE-2026-46136 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix a potential clc buffer length underflow The buf_len is used to limit the iterations for retrieving the country power setting and may underflow under certain conditions due to changes in the power table in CLC. This underflow leads to an almost infinite loop or an invalid power setting resulting in driver initialization failure. | ||||
| CVE-2026-46132 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: rtnetlink: zero ifla_vf_broadcast to avoid stack infoleak in rtnl_fill_vfinfo rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack without initialisation: struct ifla_vf_broadcast vf_broadcast; The struct contains a single fixed 32-byte field: /* include/uapi/linux/if_link.h */ struct ifla_vf_broadcast { __u8 broadcast[32]; }; The function then copies dev->broadcast into it using dev->addr_len as the length: memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len); On Ethernet devices (the overwhelming majority of SR-IOV NICs) dev->addr_len is 6, so only the first 6 bytes of broadcast[] are written. The remaining 26 bytes retain whatever was previously on the kernel stack. The full struct is then handed to userspace via: nla_put(skb, IFLA_VF_BROADCAST, sizeof(vf_broadcast), &vf_broadcast) leaking up to 26 bytes of uninitialised kernel stack per VF per RTM_GETLINK request, repeatable. The other vf_* structs in the same function are explicitly zeroed for exactly this reason - see the memset() calls for ivi, vf_vlan_info, node_guid and port_guid a few lines above. vf_broadcast was simply missed when it was added. Reachability: any unprivileged local process can open AF_NETLINK / NETLINK_ROUTE without capabilities and send RTM_GETLINK with an IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per VF per request. Stack residue at this call site can include return addresses and transient sensitive data; KASAN with stack instrumentation, or KMSAN, will flag the nla_put() when reproduced. Zero the on-stack struct before the partial memcpy, matching the existing pattern used for the other vf_* structs in the same function. | ||||
| CVE-2026-46128 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Check event message buffer response for bad data The event message buffer response data size got checked later when processing, but check it right after the response comes back. It appears some BMCs may return an empty message instead of an error when fetching events. There are apparently some new BMCs that make this error, so we need to compensate. | ||||
| CVE-2026-46125 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: remove station if connection prep fails If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs. | ||||
| CVE-2026-46124 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: isofs: validate block number from NFS file handle in isofs_export_iget isofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker- controlled block number (ifid->block or ifid->parent_block) from the NFS file handle to isofs_export_iget(), which only rejects block == 0 before calling isofs_iget() and ultimately sb_bread(). A crafted file handle with fh_len sufficient to pass the check added by commit 0405d4b63d08 ("isofs: Prevent the use of too small fid") can still drive the server to read any in-range block on the backing device as if it were an iso_directory_record. That earlier fix was assigned CVE-2025-37780. sb_bread() on an out-of-range block returns NULL cleanly via the EIO path, so there is no memory-safety violation. For in-range reads of adjacent-partition data on the same block device, the unrelated bytes end up in iso_inode_info fields that reach the NFS client as dentry metadata. The deployment surface (isofs exported over NFS from loop-mounted images) is narrow and requires an authenticated NFS peer, but the malformed-file-handle class is reportable as hardening next to the existing CVE-2025-37780 fix. Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() so the check covers both isofs_fh_to_dentry() and isofs_fh_to_parent() call sites with a single line. | ||||
| CVE-2026-46122 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: b43: enforce bounds check on firmware key index in b43_rx() The firmware-controlled key index in b43_rx() can exceed the dev->key[] array size (58 entries). The existing B43_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read. Make the B43_WARN_ON check enforcing by dropping the frame when the firmware returns an invalid key index. | ||||
| CVE-2026-46120 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_gre: Use cached t->net in ip6erspan_changelink(). After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns ip6gre hash via link_net. ip6erspan_changelink() was not converted in that series and still uses dev_net(dev), which diverges from the device's creation netns after IFLA_NET_NS_FD migration. This re-inserts the tunnel into the wrong per-netns hash. The original netns keeps a stale entry. When that netns is later destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a slab-use-after-free reported by KASAN, followed by a kernel BUG at net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify(). Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). ip6gre_changelink() earlier in the same file already uses the cached t->net; only ip6erspan_changelink() has the wrong shape. | ||||
| CVE-2026-46116 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s hlist_del_rcu calls under syzkaller load on linux-6.12.y stable (reproduced on 6.12.47, also reachable via the same code path on torvalds/master and on the ipsec tree). Nine unique signatures cluster in the xfrm_state lifecycle, the load-bearing one being: BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline] BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline] BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435 Workqueue: netns cleanup_net Call Trace: __hlist_del / hlist_del_rcu __xfrm_state_delete xfrm_state_delete xfrm_state_flush xfrm_state_fini ops_exit_list cleanup_net The other observed signatures hit the same slab object from __xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB write variant of __xfrm_state_delete, all on the byseq/byspi hash chains. __xfrm_state_delete() guards its byseq and byspi unhashes with value-based predicates: if (x->km.seq) hlist_del_rcu(&x->byseq); if (x->id.spi) hlist_del_rcu(&x->byspi); while everywhere else in the file (e.g. state_cache, state_cache_input) the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets x->id.spi = newspi inside xfrm_state_lock and then immediately inserts into byspi, but a path that observes x->id.spi != 0 outside of xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently with whether x is actually on the list. The same holds for x->km.seq versus byseq, and the bydst/bysrc unhashes have no predicate at all, so a second __xfrm_state_delete() on the same object writes through LIST_POISON pprev. The defensive change here: - Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst, bysrc, byseq and byspi so a second deletion is a no-op rather than a write through LIST_POISON pprev. The byseq/byspi nodes are already initialised in xfrm_state_alloc(). - Test hlist_unhashed() rather than the value predicate for byseq/byspi, so the unhash decision tracks list state rather than mutable scalar fields. Empirical verification: applied this patch on top of v6.12.47, rebuilt, and re-ran the same syzkaller harness for 1h16m on a previously-crashy configuration that produced ~100 hits each of slab-use-after-free Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in __xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at ~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo confirms the xfrm_state slab is actively allocated and freed during the run (~143 KiB resident), so the fuzzer is still exercising those code paths -- they just no longer crash. Reproduction: - Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV - syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db - 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal - 9 unique signatures collected in ~9h, all within xfrm_state lifecycle | ||||
| CVE-2026-46113 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected GFN The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus the SPTE index. This assumption breaks for shadow paging if the guest page tables are modified between VM entries (similar to commit aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE", 2026-03-27). The flow is as follows: - a PDE is installed for a 2MB mapping, and a page in that area is accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages; the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because the guest's mapping is a huge page (and thus contiguous). - the PDE mapping is changed from outside the guest. - the guest accesses another page in the same 2MB area. KVM installs a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN (i.e. based on the new mapping, as changed in the previous step) but that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore the rmap entry cannot be found and removed when the kvm_mmu_page is zapped. - the memslot that covers the first 2MB mapping is deleted, and the kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove() only looks at the [sp->gfn, sp->gfn + 511] range established in step 1, and fails to find the rmap entry that was recorded by step 3. - any operation that causes an rmap walk for the same page accessed by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page. This includes dirty logging or MMU notifier invalidations (e.g., from MADV_DONTNEED). The underlying issue is that KVM's walking of shadow PTEs assumes that if a SPTE is present when KVM wants to install a non-leaf SPTE, then the existing kvm_mmu_page must be for the correct gfn. Because the only way for the gfn to be wrong is if KVM messed up and failed to zap a SPTE... which shouldn't happen, but *actually* only happens in response to a guest write. That bug dates back literally forever, as even the first version of KVM assumes that the GFN matches and walks into the "wrong" shadow page. However, that was only an imprecision until 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages") came along. Fix it by checking for a target gfn mismatch and zapping the existing SPTE. That way the old SP and rmap entries are gone, KVM installs the rmap in the right location, and everyone is happy. | ||||
| CVE-2026-46110 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Prevent NULL deref when RX memory exhausted The CPU receives frames from the MAC through conventional DMA: the CPU allocates buffers for the MAC, then the MAC fills them and returns ownership to the CPU. For each hardware RX queue, the CPU and MAC coordinate through a shared ring array of DMA descriptors: one descriptor per DMA buffer. Each descriptor includes the buffer's physical address and a status flag ("OWN") indicating which side owns the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set the flag and the MAC is only allowed to clear it, and both must move through the ring in sequence: thus the ring is used for both "submissions" and "completions." In the stmmac driver, stmmac_rx() bookmarks its position in the ring with the `cur_rx` index. The main receive loop in that function checks for rx_descs[cur_rx].own=0, gives the corresponding buffer to the network stack (NULLing the pointer), and increments `cur_rx` modulo the ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its position with `dirty_rx`, allocates fresh buffers and rearms the descriptors (setting OWN=1). If it fails any allocation, it simply stops early (leaving OWN=0) and will retry where it left off when next called. This means descriptors have a three-stage lifecycle (terms my own): - `empty` (OWN=1, buffer valid) - `full` (OWN=0, buffer valid and populated) - `dirty` (OWN=0, buffer NULL) But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In the past (see 'Fixes:'), there was a bug where the loop could cycle `cur_rx` all the way back to the first descriptor it dirtied, resulting in a NULL dereference when mistaken for `full`. The aforementioned commit resolved that *specific* failure by capping the loop's iteration limit at `dma_rx_size - 1`, but this is only a partial fix: if the previous stmmac_rx_refill() didn't complete, then there are leftover `dirty` descriptors that the loop might encounter without needing to cycle fully around. The current code therefore panics (see 'Closes:') when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to catch up to `dirty_rx`. Fix this by explicitly checking, before advancing `cur_rx`, if the next entry is dirty; exit the loop if so. This prevents processing of the final, used descriptor until stmmac_rx_refill() succeeds, but fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix intended: so remove the clamp as well. Since stmmac_rx_zc() is a copy-paste-and-tweak of stmmac_rx() and the code structure is identical, any fix to stmmac_rx() will also need a corresponding fix for stmmac_rx_zc(). Therefore, apply the same check there. In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the MAC sets OWN=0 on the final descriptor, it will be unable to send any further DMA-complete IRQs until it's given more `empty` descriptors. Currently, the driver simply *hopes* that the next stmmac_rx_refill() succeeds, risking an indefinite stall of the receive process if not. But this is not a regression, so it can be addressed in a future change. | ||||
| CVE-2026-46107 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-thin: fix metadata refcount underflow There's a bug in dm-thin in the function rebalance_children. If the internal btree node has one entry, the code tries to copy all btree entries from the node's child to the node itself and then decrement the child's reference count. If the child node is shared (it has reference count > 1), we won't free it, so there would be two pointers to each of the grandchildren nodes. But the reference counts of the grandchildren is not increased, thus the reference count doesn't match the number of pointers that point to the grandchildren. This results in "device mapper: space map common: unable to decrement block" errors. Fix this bug by incrementing reference counts on the grandchildren if the btree node is shared. | ||||
| CVE-2026-46102 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: strparser: fix skb_head leak in strp_abort_strp() When the stream parser is aborted, for example after a message assembly timeout, it can still hold a reference to a partially assembled message in strp->skb_head. That skb is not released in strp_abort_strp(), which leaks the partially assembled message and can be triggered repeatedly to exhaust memory. Fix this by freeing strp->skb_head and resetting the parser state in the abort path. Leave strp_stop() unchanged so final cleanup still happens in strp_done() after the work and timer have been synchronized. | ||||
| CVE-2026-46101 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: reject zero shift in nft_bitwise Reject zero shift operands for nft_bitwise left and right shift expressions during initialization. The carry propagation logic computes the carry from the adjacent 32-bit word using BITS_PER_TYPE(u32) - shift. A zero shift operand turns this into a 32-bit shift, which is undefined behaviour. Reject zero shift operands in the control plane, alongside the existing check for values greater than or equal to 32, so malformed rules never reach the packet path. | ||||
| CVE-2026-46099 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels seg6_input_core() and rpl_input() call ip6_route_input() which sets a NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking dst_hold() unconditionally. On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can release the underlying pcpu_rt between the lookup and the caching through a concurrent FIB lookup on a shared nexthop. Simplified race sequence: ksoftirqd/X higher-prio task (same CPU X) ----------- -------------------------------- seg6_input_core(,skb)/rpl_input(skb) dst_cache_get() -> miss ip6_route_input(skb) -> ip6_pol_route(,skb,flags) [RT6_LOOKUP_F_DST_NOREF in flags] -> FIB lookup resolves fib6_nh [nhid=N route] -> rt6_make_pcpu_route() [creates pcpu_rt, refcount=1] pcpu_rt->sernum = fib6_sernum [fib6_sernum=W] -> cmpxchg(fib6_nh.rt6i_pcpu, NULL, pcpu_rt) [slot was empty, store succeeds] -> skb_dst_set_noref(skb, dst) [dst is pcpu_rt, refcount still 1] rt_genid_bump_ipv6() -> bumps fib6_sernum [fib6_sernum from W to Z] ip6_route_output() -> ip6_pol_route() -> FIB lookup resolves fib6_nh [nhid=N] -> rt6_get_pcpu_route() pcpu_rt->sernum != fib6_sernum [W <> Z, stale] -> prev = xchg(rt6i_pcpu, NULL) -> dst_release(prev) [prev is pcpu_rt, refcount 1->0, dead] dst = skb_dst(skb) [dst is the dead pcpu_rt] dst_cache_set_ip6(dst) -> dst_hold() on dead dst -> WARN / use-after-free For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release the pcpu_rt. Shared nexthop objects provide such a path, as two routes pointing to the same nhid share the same fib6_nh and its rt6i_pcpu entry. Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after ip6_route_input() to force the NOREF dst into a refcounted one before caching. The output path is not affected as ip6_route_output() already returns a refcounted dst. | ||||
| CVE-2026-46092 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: check for PCI upstream bridge existence pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | ||||