Export limit exceeded: 395398 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395398 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89478 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: drop a chunk if its transport was removed sctp_rcv() resolves the transport once per packet and leaves it in chunk->transport. The lookup reference, or the one sctp_add_backlog() takes if the socket is owned by userspace, keeps it around until the chunk has been processed. An authenticated ASCONF DEL-IP can remove it in the meantime. sctp_assoc_rm_peer() takes the transport out of the association and calls sctp_transport_free(), which tags it dead and drops the reference the association held. There is a window on both paths: the packet can sit on the socket backlog, and on the direct path the lookup completes before bh_lock_sock(). The DATA chunk in that packet puts the removed transport back into asoc->peer.last_data_from. Once the packet is done that reference goes away and the transport is freed by RCU, so the next delayed SACK carries the pointer into the SACK chunk and sctp_outq_select_transport() reads the freed transport's state. Drop the chunk in sctp_inq_push(), next to the existing rcvr->dead check. Both paths reach it with the association's socket lock held. The peer retransmits it. | ||||
| CVE-2026-89477 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix NULL deref on untransmitted RECONF completion sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and sctp_process_strreset_resp() complete a pending stream reconfiguration request by stopping the reconf timer on the transport it was sent on: t = asoc->strreset_chunk->transport; if (timer_delete(&t->reconf_timer)) sctp_transport_put(t); chunk->transport is assigned by __sctp_packet_append_chunk() when the chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms the reconf timer at that same point. A request already published in asoc->strreset_chunk but not yet transmitted has neither, so completing it dereferences NULL. Two ways to get there. sctp_send_asconf_del_ip() sets asoc->src_out_of_asoc_ok without sending anything when the address being removed is the association's last one, and sctp_outq_flush_ctrl() then leaves every non-ASCONF control chunk queued; as only sctp_process_asconf_ack() clears that flag, it persists. An unprivileged process that removes such an address and then asks for a stream reset panics the kernel from softirq. A peer needs neither ASCONF nor local help: sctp_cmd_interpreter() uncorks the outqueue only once the whole packet has been processed, so a reply built while walking a RECONF chunk stays untransmitted for the rest of that walk, and one RECONF chunk carrying [Incoming SSN Reset Request, Outgoing SSN Reset Request, Response] -- or two RECONF chunks in one packet -- reaches the same dereference. KASAN: null-ptr-deref in range [0x00000000000001e8-0x00000000000001ef] RIP: 0010:timer_delete+0x67/0x110 Call Trace: <IRQ> sctp_process_strreset_addstrm_out (net/sctp/stream.c:832) sctp_sf_do_reconf (net/sctp/sm_statefuns.c:4212) sctp_do_sm (net/sctp/sm_sideeffect.c:1172) sctp_assoc_bh_rcv (net/sctp/associola.c:1044) sctp_rcv (net/sctp/input.c:243) ip_local_deliver (net/ipv4/ip_input.c:262) process_backlog (net/core/dev.c:6680) </IRQ> A response can only acknowledge a request that was actually sent, so do not match asoc->strreset_chunk while chunk->transport is NULL. Guarding the lookup covers all three completion sites. | ||||
| CVE-2026-89476 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix stream->outcnt underflow on duplicate RECONF responses A cached RECONF chunk may contain more than one request parameter. A duplicate response can therefore find and process the same ADD_OUT request again while another parameter is still outstanding, rolling back outcnt twice and possibly underflowing it. Track outstanding request types as bits and clear each bit after its first response. Later responses for the same request are then ignored. | ||||
| CVE-2026-89448 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Force requesting ACS when tboot is enabled Currently the conditions of requesting ACS in detect_intel_iommu() don't include tboot, leading to a possible misconfiguration with ACS disabled (e.g. due to user opts) while iommu is later forced on by tboot_force_iommu(). Fix it by checking tboot in detect_intel_iommu(). | ||||
| CVE-2026-89441 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: cancel card-detect work on remove Disabling the device interrupt and freeing the IRQ prevents new card-detect work from being queued, but carddet_work already queued by the handler can still run after via_sd_remove() returns. via_sdc_card_detect() recovers the host through container_of() and dereferences its MMIO base; once remove() returns the host can be freed, so that work would touch freed memory. Cancel carddet_work after freeing the IRQ and before cancelling finish_bh_work, which the card-detect handler can also queue. carddet_work can re-enable the interrupt through via_reset_pcictrl(); mask it again afterwards. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-88755 | 2026-10-16 | 7.8 High | ||
| Z.ai ZCode v3.11.2.6792 was discovered to automatically establish connections with MCP servers declared inside a repository's workspace configuration, possibly allowing attackers to execute arbitrary code via opening a crafted repository. | ||||
| CVE-2026-87029 | 2026-10-16 | 5.9 Medium | ||
| undici is an HTTP client library for Node.js. In versions 7.15.0 through 7.30.0 and 8.0.0 through 8.12.1, its decompress interceptor forwards decompressed response data to the downstream handler from zlib stream event callbacks without catching exceptions those callbacks may throw, and while undici's engine converts a synchronous throw from a downstream handler into a per-request failure, that protection is absent when the throw happens asynchronously from a zlib callback. As a result, a downstream handler that throws by design, such as the built-in dump interceptor which throws when a response exceeds its configured maximum size, escapes as an uncaught exception that terminates the Node.js process. A malicious or compromised HTTP server can crash any client that composes the decompress interceptor with such a handler by returning a small compressed body that decompresses to more than the configured limit, so only the decompressed size matters and the bytes on the wire stay tiny. The issue is fixed in undici 7.30.1 and 8.12.2, and users should upgrade to one of those versions or later. As a workaround, avoid composing the decompress interceptor with a response handler that throws during response processing until upgrading. | ||||
| CVE-2026-87018 | 2026-10-16 | 7.5 High | ||
| undici is an HTTP client library for Node.js. In versions 4.2.1 through 6.29.0, 7.0.0 through 7.30.0, and 8.0.0 through 8.12.1, the client process crashes when a TLS 1.2 server renegotiates after the connection is established and presents a different, CA-trusted certificate whose hostname does not match the requested host. Node.js re-runs hostname verification on the renegotiated handshake and destroys the socket with a certificate-altname error, but undici's established-socket error handler asserted that this error code could never occur, so the peer-controlled error became an uncaught assertion that terminates the Node.js process, affecting both the HTTP/1.1 and HTTP/2 paths. A malicious or compromised HTTPS endpoint reached through undici or the global fetch() can crash the client with a single server-initiated renegotiation, taking down all in-flight requests and background work in the process, and exploitation needs no CA compromise because the attacker controls the endpoint and can present two ordinary valid certificates. Only TLS 1.2 is affected, since TLS 1.3 does not support renegotiation. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, and users should upgrade to one of those versions or later. As a workaround, restrict outbound connections to TLS 1.3 so renegotiation cannot occur, when the target endpoints support it. | ||||
| CVE-2026-85231 | 1 Redhat | 3 Enterprise Linux, Hummingbird, Openshift | 2026-10-16 | 6.5 Medium |
| A flaw was found in libtirpc. An authenticated remote attacker could exploit this vulnerability by sending oversized wrapped data requests to an RPC (Remote Procedure Call) service configured with RPCSEC_GSS (Remote Procedure Call Security-Generic Security Service) integrity or privacy. This can lead to unbounded memory allocation, resulting in a Denial of Service (DoS) by exhausting system resources and causing the service to become unstable or terminate. | ||||
| CVE-2026-81002 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xdp: fix zero-copy frame layout xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page and advertises PAGE_SIZE as its frame size. It allows the copied frame to occupy the page tail needed by skb_shared_info and records zero headroom even when metadata separates the frame header from packet data. An AF_XDP zero-copy packet redirected through cpumap can therefore make the skb overlap skb_shared_info or place it beyond the allocated page. Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the metadata length in frame headroom. Redirect callers already handle a NULL conversion result. BUG: KASAN: slab-out-of-bounds in skb_gro_receive Write of size 4 at addr ffff88800cf37004 by task cpumap/1/map:1/146 Call Trace: skb_gro_receive (net/core/gro.c:174) udp_gro_receive (net/ipv4/udp_offload.c:812) inet_gro_receive (net/ipv4/af_inet.c:1539) dev_gro_receive (net/core/gro.c:515) gro_receive_skb (net/core/gro.c:633) cpu_map_kthread_run (kernel/bpf/cpumap.c:395) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:255) Kernel panic - not syncing: KASAN: panic_on_warn set ... | ||||
| CVE-2026-81001 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: slip: fix use-after-free in sl_sync() slip_devs[] stores bare net_device pointers and takes no reference on them. sl_sync() and sl_alloc() walk that table from slip_open() under rtnl_lock(), while an entry is dropped by sl_free_netdev(), which sl_setup() installs as dev->priv_destructor. priv_destructor is called from netdev_run_todo(), which deliberately runs with the RTNL semaphore released so that it can sleep while waiting for the device refcount to drop: /* Snapshot list, allow later requests */ list_replace_init(&net_todo_list, &list); __rtnl_unlock(); ... if (dev->priv_destructor) dev->priv_destructor(dev); /* slip_devs[i] = NULL */ if (dev->needs_free_netdev) free_netdev(dev); ... /* Free network device */ kobject_put(&dev->dev.kobj); So rtnl_lock() does not serialise slip_open() against the teardown at all. sl_sync() can load slip_devs[i] while the entry is still published and dereference it after netdev_run_todo() has run the destructor and released the device: CPU0 (slip_open) CPU1 (slip_close) unregister_netdev() rtnl_unlock() netdev_run_todo() __rtnl_unlock() rtnl_lock() sl_sync() dev = slip_devs[i] priv_destructor(dev) slip_devs[i] = NULL kobject_put(&dev->dev.kobj) /* dev is freed */ sl = netdev_priv(dev) if (sl->tty || sl->leased) /* use-after-free */ BUG: KASAN: use-after-free in sl_sync drivers/net/slip/slip.c:730 [inline] BUG: KASAN: use-after-free in slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806 Read of size 1 at addr ffff8880712dac71 by task syz-executor.2/6506 CPU: 2 PID: 6506 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00260-g0c8fc3469765 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: sl_sync drivers/net/slip/slip.c:730 [inline] slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806 tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433 tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564 tiocsetd drivers/tty/tty_io.c:2428 [inline] tty_ioctl+0x5f0/0x1530 drivers/tty/tty_io.c:2712 Allocated by task 6502: alloc_netdev_mqs+0x98/0xfe0 net/core/dev.c:10719 sl_alloc drivers/net/slip/slip.c:756 [inline] slip_open+0x36d/0x1210 drivers/net/slip/slip.c:817 tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433 tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564 Freed by task 6497: device_release+0xa2/0x240 drivers/base/core.c:2507 kobject_put+0x179/0x280 lib/kobject.c:729 netdev_run_todo+0x6c8/0xef0 net/core/dev.c:10509 slip_close+0x166/0x1c0 drivers/net/slip/slip.c:906 tty_ldisc_close+0x113/0x1a0 drivers/tty/tty_ldisc.c:456 tty_ldisc_kill+0x94/0x160 drivers/tty/tty_ldisc.c:614 tty_ldisc_release+0xe3/0x2b0 drivers/tty/tty_ldisc.c:782 tty_release+0xbcc/0xe70 drivers/tty/tty_io.c:1860 Commit e58c19124189 ("slip: Fix use-after-free Read in slip_open") fixed a different source of stale entries - a device left in slip_devs[] after slip_open() freed it on the registration error path - and does not address this race, which is why the report survives it. Drop the entry from ndo_uninit instead. unregister_netdevice() calls ndo_uninit under RTNL, before the device is queued to netdev_run_todo(), so an entry that sl_sync() can still see while holding RTNL belongs to a device that cannot be freed until RTNL is dropped. sl_free_netdev() stays only for the slip_open() error path, where register_netdevice() may have failed before ndo_init and ndo_uninit is then not called either. Both running for the same device is harmless: the ---truncated--- | ||||
| CVE-2026-81000 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: tun: bound receive headroom tun_get_user() uses tun->align both as skb headroom and when choosing how much packet data to keep linear. OVS can propagate an oversized headroom request from another port to TUN or TAP. When align is larger than the usable space in a one-page skb head, SKB_MAX_HEAD(align) underflows and the result becomes negative when stored in good_linear. That value later wraps when assigned to the size_t linear variable, and tun_alloc_skb() can place skb->data outside the allocated head. Bound the headroom stored by TUN to the one-page skb-head budget and the largest non-sentinel 16-bit skb header offset. Leave one linear byte for raw TUN and a complete Ethernet header for TAP, including NET_IP_ALIGN. Also pull the raw-TUN protocol byte and the TAP Ethernet header before accessing them, so these checks remain safe for nonlinear skbs supplied by other allocation paths. | ||||
| CVE-2026-80994 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix flow mask use-after-free on flow deletion The commit in the Fixes tag below made so flow->mask free is scheduled via RCU right after it is removed from the flow table. The pointer stays in the flow structure and it can be accessible while in the same RCU critical section. This is done to avoid requiring ovs_mutex for the ovs_flow_free(). However, while removing the flow during processing of CMD_DEL, we do not take RCU read lock before the removal, and ovs_flow_cmd_fill_info() uses the flow->mask pointer afterwards. The RCU read lock is taken, but it's already late at that point. The comment on that line acknowledges that the lock is cosmetic and doesn't serve a real purpose. This leads to use-after-free if the RCU grace period passes between removal and the filling. It is a short race window, but it is there and can lead to a real crash in case memory allocation for the info takes a bit longer: BUG: KASAN: slab-use-after-free in __ovs_nla_put_key net/openvswitch/flow_netlink.c:1996 BUG: KASAN: slab-use-after-free in ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250 Read of size 4 at addr ffff88801ee89970 by task ovs_flow_del_ec/9487 Call Trace: <TASK> __ovs_nla_put_key net/openvswitch/flow_netlink.c:1996 ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250 ovs_flow_cmd_fill_info+0x420/0x9c0 net/openvswitch/datapath.c:930 ovs_flow_cmd_del+0x53a/0x970 net/openvswitch/datapath.c:1467 ... netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556 </TASK> Allocated by task 9487: mask_alloc net/openvswitch/flow_table.c:967 flow_mask_insert net/openvswitch/flow_table.c:1012 ovs_flow_tbl_insert+0xea2/0x1a90 net/openvswitch/flow_table.c:1084 ovs_flow_cmd_new+0x7e3/0xd90 net/openvswitch/datapath.c:1086 ... netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556 Freed by task 9485: rcu_free_sheaf+0x1e/0x100 mm/slub.c:5978 rcu_do_batch kernel/rcu/tree.c:2645 rcu_core+0x59c/0x10c0 kernel/rcu/tree.c:2897 handle_softirqs+0x1e4/0x9a0 kernel/softirq.c:622 ... instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 ovs_flow_tbl_remove() must be called after the ovs_flow_cmd_fill_info() to avoid this race. This also helps with cleaning up the forced cast and the cosmetic RCU read lock. Before the commit in the Fixes tag the order did not matter as long as the flow object itself was not freed. A wider RCU critical section could be another option, but we have a GFP_KERNEL allocation in the way. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-32042. | ||||
| CVE-2026-80989 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Mark the connection down when bringing it up fails Every failure path in tbnet_connected_work() undoes its own work and returns without clearing login_sent, so the connection still looks established. The next tbnet_tear_down() therefore takes its main branch and repeats a teardown that already happened: it stops rings that are already stopped, which is a dev_WARN() and fatal under panic_on_warn, and it releases net->remote_transmit_path even on the HopID mismatch path, where this connection never owned that id, silently freeing one that someone else is still using. Clear login_sent on those paths. That is enough for tbnet_tear_down() to leave the unwound state alone, and login_received has to stay set: it records that the peer has logged in and carries the transmit path it gave us, which nothing on this side can make the peer send again. Two things change beyond keeping the teardown out of the way: the logout request in that block is no longer sent, and the peer's next login request now re-queues our login work rather than connected_work, giving the connection a fresh login instead of a retry on stale state. | ||||
| CVE-2026-80987 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NTB: ntb_transport: Reject oversized TX buffers ntb_process_tx() handles an oversized buffer by calling tx_handler() with a NULL data pointer and returning success. ntb_netdev therefore neither frees the skb in its completion callback nor takes its enqueue error path, leaking it. Reject oversized buffers in ntb_transport_tx_enqueue() before acquiring a queue entry and return -EMSGSIZE. The caller retains ownership of the buffer, and the preceding netdev patch frees the skb when enqueue returns this permanent error. | ||||
| CVE-2026-80982 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix use-after-free in smc_rx_pipe_buf_release() smc_rx_splice() hands RMB pages to a pipe and takes a socket reference per entry so the smc_sock stays alive until the reader finishes. The connection does not: a concurrent close runs smc_conn_free(), which releases the receive buffer back to the link group pool. smc_rx_pipe_buf_release() tests sk_state before taking the socket lock. The state can change between the test and the lock, and smc_rx_update_cons() then dereferences conn->rmb_desc and walks conn->lgr, which smc_conn_free() has already released. On the is_reg_err path smcr_buf_unuse() frees the descriptor outright, so this is a use-after-free. Take the socket lock first and test conn->freed instead. smc_conn_free() sets that flag before releasing anything, and every caller holds the socket lock. The two paths exclude each other: either the pipe release runs first with everything valid, or it sees the flag and skips the update. | ||||
| CVE-2026-80980 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: stop killed, freed and out_of_sync sharing a byte The three connection state flags are single-bit bitfields, so they occupy one byte of struct smc_connection and every store to one is a read-modify-write of the other two: u8 killed : 1; u8 freed : 1; u8 out_of_sync : 1; They are not written under a common lock. smc_cdc_msg_validate() sets out_of_sync from the receive tasklet, while smc_conn_kill() sets killed from process context under lock_sock(), and the receive path does not defer to the backlog when the socket is owned -- smc_cdc_msg_recv() takes only bh_lock_sock(). Give each flag its own byte so a store no longer touches its neighbours. All readers test them as booleans and are unchanged. struct smc_connection grows by two bytes. | ||||
| CVE-2026-80978 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: cap advertised IP tunnel headroom IP tunnel devices derive their advertised needed_headroom from lower output devices. A stack of user-created devices can make the derived value larger than the 16-bit skb header offsets can represent. Once IP output reserves it, skb head expansion can wrap those offsets. The runtime transmit path already caps a growing needed_headroom at 512. Apply the same cap when tunnel configuration publishes needed_headroom derived from a lower output device. Capping the advertised value is safe: IP tunnel transmit still expands the skb when a packet needs more headroom. A nonsensical stacked configuration can therefore incur an extra reallocation, but it cannot publish an unbounded reservation to upper layers. | ||||
| CVE-2026-80977 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't touch shared zerocopy state in skb_tx_error() skb_tx_error() completes the zerocopy uarg and clears SKBFL_ALL_ZEROCOPY, and skb_zcopy_downgrade_managed() clears SKBFL_MANAGED_FRAG_REFS. Both live in skb_shinfo(), which every clone shares, while the caller only owns the reference it is about to drop. Through a clone it tells the producer its pages are free and drops SKBFL_SHARED_FRAG for an skb that is still in flight. Open vSwitch reaches this with a non-last OVS_ACTION_ATTR_RECIRC: clone_execute() sends a skb_clone() into ovs_dp_process_packet() while do_execute_actions() keeps forwarding the original, and skb_clone() does not privatise the frags here -- skb_orphan_frags() returns early on SKBFL_DONT_ORPHAN. A flow miss on the clone then strips the marker from the packet still being forwarded, and a later local ESP delivery decrypts in place over frags it does not own privately. Skip it for a cloned skb. Nothing is lost: skb_release_data() clears the zerocopy state once the last reference to the shared data goes. | ||||
| CVE-2026-80971 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: clear the URB pointers on disconnect bcd2000_free_usb_related_resources() frees both URBs and leaves the pointers behind: usb_kill_urb(bcd2k->midi_out_urb); usb_kill_urb(bcd2k->midi_in_urb); usb_free_urb(bcd2k->midi_out_urb); usb_free_urb(bcd2k->midi_in_urb); The rawmidi device outlives that call. A substream that is still open when the device is unplugged reaches bcd2000_midi_send() from the trigger path on close. That function writes to the freed URB and then hands it to the USB core: bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE; ... ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC); usb_kill_urb() does not stop a later submission either, so a submit that races the disconnect can requeue the URB after it has been reaped. midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits it from the completion handler. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000] Write of size 4 at addr ffff00001827d388 by task bpoc/168 __asan_store4 bcd2000_midi_send [snd_bcd2000] bcd2000_midi_output_trigger [snd_bcd2000] snd_rawmidi_kernel_write1 close_substream.part.0 Freed by task 168: usb_free_urb bcd2000_disconnect [snd_bcd2000] BUG: KASAN: slab-use-after-free in usb_submit_urb Read of size 8 at addr ffff00001827d3b8 by task bpoc/168 Clear both pointers after freeing and test them on the paths that can still run. Poison the URBs before freeing them: usb_poison_urb() waits for a running completion handler and rejects any later submission, so after it returns the input path is quiesced and only the rawmidi trigger path can still reach bcd2000_midi_send(). No unpoison is needed; the URBs are freed on the next line. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||