| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/notify: call exportfs_encode_fid with s_umount
Calling intotify_show_fdinfo() on fd watching an overlayfs inode, while
the overlayfs is being unmounted, can lead to dereferencing NULL ptr.
This issue was found by syzkaller.
Race Condition Diagram:
Thread 1 Thread 2
-------- --------
generic_shutdown_super()
shrink_dcache_for_umount
sb->s_root = NULL
|
| vfs_read()
| inotify_fdinfo()
| * inode get from mark *
| show_mark_fhandle(m, inode)
| exportfs_encode_fid(inode, ..)
| ovl_encode_fh(inode, ..)
| ovl_check_encode_origin(inode)
| * deref i_sb->s_root *
|
|
v
fsnotify_sb_delete(sb)
Which then leads to:
[ 32.133461] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 32.134438] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 32.135032] CPU: 1 UID: 0 PID: 4468 Comm: systemd-coredum Not tainted 6.17.0-rc6 #22 PREEMPT(none)
<snip registers, unreliable trace>
[ 32.143353] Call Trace:
[ 32.143732] ovl_encode_fh+0xd5/0x170
[ 32.144031] exportfs_encode_inode_fh+0x12f/0x300
[ 32.144425] show_mark_fhandle+0xbe/0x1f0
[ 32.145805] inotify_fdinfo+0x226/0x2d0
[ 32.146442] inotify_show_fdinfo+0x1c5/0x350
[ 32.147168] seq_show+0x530/0x6f0
[ 32.147449] seq_read_iter+0x503/0x12a0
[ 32.148419] seq_read+0x31f/0x410
[ 32.150714] vfs_read+0x1f0/0x9e0
[ 32.152297] ksys_read+0x125/0x240
IOW ovl_check_encode_origin derefs inode->i_sb->s_root, after it was set
to NULL in the unmount path.
Fix it by protecting calling exportfs_encode_fid() from
show_mark_fhandle() with s_umount lock.
This form of fix was suggested by Amir in [1].
[1]: https://lore.kernel.org/all/CAOQ4uxhbDwhb+2Brs1UdkoF0a3NSdBAOQPNfEHjahrgoKJpLEw@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: micrel: always set shared->phydev for LAN8814
Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP
clock gets actually set, otherwise the function will return before setting
it.
This is an issue as shared->phydev is unconditionally being used when IRQ
is being handled, especially in lan8814_gpio_process_cap and since it was
not set it will cause a NULL pointer exception and crash the kernel.
So, simply always set shared->phydev to avoid the NULL pointer exception. |
| In the Linux kernel, the following vulnerability has been resolved:
net: core: prevent NULL deref in generic_hwtstamp_ioctl_lower()
The ethtool tsconfig Netlink path can trigger a null pointer
dereference. A call chain such as:
tsconfig_prepare_data() ->
dev_get_hwtstamp_phylib() ->
vlan_hwtstamp_get() ->
generic_hwtstamp_get_lower() ->
generic_hwtstamp_ioctl_lower()
results in generic_hwtstamp_ioctl_lower() being called with
kernel_cfg->ifr as NULL.
The generic_hwtstamp_ioctl_lower() function does not expect
a NULL ifr and dereferences it, leading to a system crash.
Fix this by adding a NULL check for kernel_cfg->ifr in
generic_hwtstamp_ioctl_lower(). If ifr is NULL, return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added
In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I
missed the case where state creation fails between full
initialization (->init_state has been called) and being inserted on
the lists.
In this situation, ->init_state has been called, so for IPcomp
tunnels, the fallback tunnel has been created and added onto the
lists, but the user state never gets added, because we fail before
that. The user state doesn't go through __xfrm_state_delete, so we
don't call xfrm_state_delete_tunnel for those states, and we end up
leaking the FB tunnel.
There are several codepaths affected by this: the add/update paths, in
both net/key and xfrm, and the migrate code (xfrm_migrate,
xfrm_state_migrate). A "proper" rollback of the init_state work would
probably be doable in the add/update code, but for migrate it gets
more complicated as multiple states may be involved.
At some point, the new (not-inserted) state will be destroyed, so call
xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states
will have their fallback tunnel cleaned up during __xfrm_state_delete,
which solves the issue that b441cf3f8c4b (and other patches before it)
aimed at. All states (including FB tunnels) will be removed from the
lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix scx_enable() crash on helper kthread creation failure
A crash was observed when the sched_ext selftests runner was
terminated with Ctrl+\ while test 15 was running:
NIP [c00000000028fa58] scx_enable.constprop.0+0x358/0x12b0
LR [c00000000028fa2c] scx_enable.constprop.0+0x32c/0x12b0
Call Trace:
scx_enable.constprop.0+0x32c/0x12b0 (unreliable)
bpf_struct_ops_link_create+0x18c/0x22c
__sys_bpf+0x23f8/0x3044
sys_bpf+0x2c/0x6c
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
kthread_run_worker() returns an ERR_PTR() on failure rather than NULL,
but the current code in scx_alloc_and_add_sched() only checks for a NULL
helper. Incase of failure on SIGQUIT, the error is not handled in
scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an
error pointer.
Error handling is fixed in scx_alloc_and_add_sched() to propagate
PTR_ERR() into ret, so that scx_enable() jumps to the existing error
path, avoiding random dereference on failure. |
| A vulnerability has been identified in Energy Services (All versions with G5DFR). Affected solutions using G5DFR contain default credentials. This could allow an attacker to gain control of G5DFR component and tamper with outputs from the device. |
| A vulnerability was found in Weitong Mall 1.0.0. It has been classified as critical. This affects an unknown part of the component Sale Endpoint. The manipulation of the argument ID leads to improper authorization. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in feng_ha_ha/megagao ssm-erp and production_ssm 1.0. It has been declared as problematic. Affected by this vulnerability is the function handleFileDownload of the file FileController.java of the component File Handler. The manipulation leads to path traversal. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This product is distributed under two entirely different names. |
| A vulnerability classified as critical has been found in Shanghai Bairui Information Technology SunloginClient 15.8.3.19819. This affects an unknown part in the library process.dll of the file sunlogin_guard.exe. The manipulation leads to uncontrolled search path. Local access is required to approach this attack. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability, which was classified as problematic, has been found in SunGrow Logger1000 01_A. This issue affects some unknown processing. The manipulation leads to weak password requirements. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability exists in the NodeRestriction admission controller where nodes can bypass dynamic resource allocation authorization checks. When the DynamicResourceAllocation feature gate is enabled, the controller properly validates resource claim statuses during pod status updates but fails to perform equivalent validation during pod creation. This allows a compromised node to create mirror pods that access unauthorized dynamic resources, potentially leading to privilege escalation. |
| pycares is a Python module which provides an interface to c-ares. c-ares is a C library that performs DNS requests and name resolutions asynchronously. Prior to version 4.9.0, pycares is vulnerable to a use-after-free condition that occurs when a Channel object is garbage collected while DNS queries are still pending. This results in a fatal Python error and interpreter crash. The vulnerability has been fixed in pycares 4.9.0 by implementing a safe channel destruction mechanism. |
| OpenStack Glance before 29.1.1, 30.x before 30.1.1, and 31.0.0 is affected by Server-Side Request Forgery (SSRF). By use of HTTP redirects, an authenticated user can bypass URL validation checks and redirect to internal services. Only glance image import functionality is affected. In particular, the web-download and glance-download import methods are subject to this vulnerability, as is the optional (not enabled by default) ovf_process image import plugin. |
| Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. Prior to version 0.9-rc4, any unprivileged local user can crash avahi-daemon by sending a single D-Bus method call with conflicting publish flags. This issue has been patched in version 0.9-rc4. |
| gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening. |
| league/commonmark is a PHP Markdown parser. From version 2.3.0 to before version 2.8.2, the DomainFilteringAdapter in the Embed extension is vulnerable to an allowlist bypass due to a missing hostname boundary assertion in the domain-matching regex. An attacker-controlled domain like youtube.com.evil passes the allowlist check when youtube.com is an allowed domain. This issue has been patched in version 2.8.2. |
| The Everest Forms plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 3.4.3 via deserialization of untrusted input from form entry metadata. This is due to the html-admin-page-entries-view.php file calling PHP's native unserialize() on stored entry meta values without passing the allowed_classes parameter. This makes it possible for unauthenticated attackers to inject a serialized PHP object payload through any public Everest Forms form field. The payload survives sanitize_text_field() sanitization (serialization control characters are not stripped) and is stored in the wp_evf_entrymeta database table. When an administrator views entries or views an individual entry, the unsafe unserialize() call processes the stored data without class restrictions. |
| GLPI is a free asset and IT management software package. From 11.0.0 to before 11.0.6, template injection by an administrator lead to RCE. This vulnerability is fixed in 11.0.6. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, a signed integer overflow exists in undo_pxr24_impl() in src/lib/OpenEXRCore/internal_pxr24.c at line 377. The expression (uint64_t)(w * 3) computes w * 3 as a signed 32-bit integer before casting to uint64_t. When w is large, this multiplication constitutes undefined behavior under the C standard. On tested builds (clang/gcc without sanitizers), two's-complement wraparound commonly occurs, and for specific values of w the wrapped result is a small positive integer, which may allow the subsequent bounds check to pass incorrectly. If the check is bypassed, the decoding loop proceeds to write pixel data through dout, potentially extending far beyond the allocated output buffer. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.1.0 to before 3.2.7, 3.3.9, and 3.4.9, internal_exr_undo_piz() advances the working wavelet pointer with signed 32-bit arithmetic. Because nx, ny, and wcount are int, a crafted EXR file can make this product overflow and wrap. The next channel then decodes from an incorrect address. The wavelet decode path operates in place, so this yields both out-of-bounds reads and out-of-bounds writes. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9. |
