| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Tencent HunyuanDiT model_resume Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent HunyuanDiT. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the model_resume function. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27183. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: invalidate dentry cache on failed whiteout creation
F2FS can mount filesystems with corrupted directory depth values that
get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT
operations are performed on such directories, f2fs_rename performs
directory modifications (updating target entry and deleting source
entry) before attempting to add the whiteout entry via f2fs_add_link.
If f2fs_add_link fails due to the corrupted directory structure, the
function returns an error to VFS, but the partial directory
modifications have already been committed to disk. VFS assumes the
entire rename operation failed and does not update the dentry cache,
leaving stale mappings.
In the error path, VFS does not call d_move() to update the dentry
cache. This results in new_dentry still pointing to the old inode
(new_inode) which has already had its i_nlink decremented to zero.
The stale cache causes subsequent operations to incorrectly reference
the freed inode.
This causes subsequent operations to use cached dentry information that
no longer matches the on-disk state. When a second rename targets the
same entry, VFS attempts to decrement i_nlink on the stale inode, which
may already have i_nlink=0, triggering a WARNING in drop_nlink().
Example sequence:
1. First rename (RENAME_WHITEOUT): file2 → file1
- f2fs updates file1 entry on disk (points to inode 8)
- f2fs deletes file2 entry on disk
- f2fs_add_link(whiteout) fails (corrupted directory)
- Returns error to VFS
- VFS does not call d_move() due to error
- VFS cache still has: file1 → inode 7 (stale!)
- inode 7 has i_nlink=0 (already decremented)
2. Second rename: file3 → file1
- VFS uses stale cache: file1 → inode 7
- Tries to drop_nlink on inode 7 (i_nlink already 0)
- WARNING in drop_nlink()
Fix this by explicitly invalidating old_dentry and new_dentry when
f2fs_add_link fails during whiteout creation. This forces VFS to
refresh from disk on subsequent operations, ensuring cache consistency
even when the rename partially succeeds.
Reproducer:
1. Mount F2FS image with corrupted i_current_depth
2. renameat2(file2, file1, RENAME_WHITEOUT)
3. renameat2(file3, file1, 0)
4. System triggers WARNING in drop_nlink() |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: set dummy blocksize to read boot_block when mounting
When mounting, sb->s_blocksize is used to read the boot_block without
being defined or validated. Set a dummy blocksize before attempting to
read the boot_block.
The issue can be triggered with the following syz reproducer:
mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0)
r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0)
ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000)
mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00',
&(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0)
syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0)
Here, the ioctl sets the bdev block size to 16384. During mount,
get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)),
but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leaves
sb->s_blocksize at zero.
Later, ntfs_init_from_boot() attempts to read the boot_block while
sb->s_blocksize is still zero, which triggers the bug.
[almaz.alexandrovich@paragon-software.com: changed comment style, added
return value handling] |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: using the num_tqps in the vf driver to apply for resources
Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp
is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to
min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller
than hdev->num_tqps, which causes some hdev->htqp[i] to remain
uninitialized in hclgevf_knic_setup().
Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,
ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent
and that all elements are properly initialized. |
| IBM Operations Analytics – Log Analysis versions 1.3.5.0 through 1.3.8.3 and IBM SmartCloud Analytics – Log Analysis are vulnerable to a cross-site request forgery (CSRF) vulnerability that could allow an attacker to trick a trusted user into performing unauthorized actions. |
| HCL Workload Scheduler stores user credentials in plain text which can be read by a local user. |
| An issue in Arris NVG443B 9.3.0h3d36 allows a physically proximate attacker to execute arbitrary code via the cshell login component. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: skip lock-range check on equal size to avoid size==0 underflow
When size equals the current i_size (including 0), the code used to call
check_lock_range(filp, i_size, size - 1, WRITE), which computes `size - 1`
and can underflow for size==0. Skip the equal case. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in POSIMYTH Nexter Blocks the-plus-addons-for-block-editor allows Stored XSS.This issue affects Nexter Blocks: from n/a through <= 3.3.3. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Elementor Elementor Website Builder elementor allows Stored XSS.This issue affects Elementor Website Builder: from n/a through <= 3.29.0. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in LiteSpeed Technologies LiteSpeed Cache litespeed-cache allows Stored XSS.This issue affects LiteSpeed Cache: from n/a through <= 6.5.2. |
| A vulnerability has been identified in syngo.plaza VB30E (All versions < VB30E_HF07). The affected application does not encrypt the passwords properly.
This could allow an attacker to recover the original passwords and might gain unauthorized access. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Liton Arefin Master Addons for Elementor master-addons allows Stored XSS.This issue affects Master Addons for Elementor: from n/a through <= 2.0.9.9.4. |
| An issue inTcpreplay v4.5.1 allows a local attacker to cause a denial of service via a crafted file to the tcpedit_dlt_getplugin function at src/tcpedit/plugins/dlt_utils.c. |
| Missing Authorization vulnerability in Seraphinite Solutions Seraphinite Accelerator seraphinite-accelerator allows Retrieve Embedded Sensitive Data.This issue affects Seraphinite Accelerator: from n/a through <= 2.22.15. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in desertthemes NewsMash newsmash allows Stored XSS.This issue affects NewsMash: from n/a through <= 1.0.71. |
| Improper limitation of a pathname to a restricted directory ('Path Traversal') issue exists in FitNesse releases prior to 20241026. If this vulnerability is exploited, an attacker may be able to know whether a file exists at a specific path, and/or obtain some part of the file contents under specific conditions. |
| perl2exe <= V30.10C contains an arbitrary code execution vulnerability that allows local authenticated attackers to execute malicious scripts. Attackers can control the 0th argument of packed executables to execute another executable, allowing them to bypass restrictions and gain unauthorized access. |
| dizqueTV 1.5.3 contains a remote code execution vulnerability that allows attackers to inject arbitrary commands through the FFMPEG Executable Path settings. Attackers can modify the executable path with shell commands to read system files like /etc/passwd by exploiting improper input validation. |
| PCMan FTP Server 2.0 contains a buffer overflow vulnerability in the 'pwd' command that allows remote attackers to execute arbitrary code. Attackers can send a specially crafted payload during the FTP login process to overwrite memory and potentially gain system access. |
