Export limit exceeded: 409293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409293 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-16228 | 1 Sourcecodester | 1 Class And Exam Timetabling System | 2026-07-20 | 7.3 High |
| A vulnerability was detected in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /edit_schoolyr.php. Performing a manipulation of the argument ID results in sql injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. | ||||
| CVE-2026-57082 | 1 Sanko | 1 Net::bittorrent | 2026-07-20 | 5.9 Medium |
| Net::BitTorrent versions before 2.1.0 for Perl generate the MSE Diffie-Hellman private key with a non-cryptographic PRNG. The MSE (Message Stream Encryption) handshake derives its 160-bit Diffie-Hellman private key from Perl's rand(), a non-cryptographic drand48-class generator seeded once per process, in KeyExchange.pm. The shared secret and the RC4 keys derived from it (the SHA-1 of "keyA" or "keyB", the shared secret, and the infohash) therefore depend entirely on a predictable PRNG. The same handshake sends, in cleartext, random padding drawn from the same rand() sequence in _random_pad, immediately after the public key and the private-key draw. A passive observer of the handshake recovers the PRNG state from the cleartext padding, reconstructs the private key, computes the shared secret from the peer's public key on the wire, derives the RC4 keys, and decrypts the connection, defeating the passive-observation obfuscation MSE provides. | ||||
| CVE-2026-57081 | 1 Sanko | 1 Net::bittorrent | 2026-07-20 | 7.5 High |
| Net::BitTorrent versions through 2.1.0 for Perl allow remote memory exhaustion via deeply nested bencoded input. bdecode recurses once per nested list or dictionary level with no depth cap, and each recursive call receives the remaining buffer by value while the list and dictionary branches capture the whole remainder, so every live recursion frame keeps its own copy of the shrinking buffer (O(N^2) bytes for an N-deep input). The decoder runs on every untrusted bencode source: .torrent files, BEP09 metadata fetched from peers, DHT messages, and tracker responses. A bencoded input of roughly 150,000 nested lists (about 150 KB on the wire) drives multi-gigabyte peak memory, so one short message from any peer, or one crafted .torrent file or magnet link, terminates the client. | ||||
| CVE-2026-57080 | 1 Sanko | 1 Net::bittorrent | 2026-07-20 | 7.5 High |
| Net::BitTorrent versions through 2.1.0 for Perl allow remote memory exhaustion via an uncapped peer-wire message-length prefix. The peer-wire framing in _process_messages trusts the 4-byte length prefix sent by a connected peer with no upper bound, while receive_data appends every inbound byte to the input buffer. A peer announces a length prefix of up to about 4 GiB and then streams bytes; the decoder waits until the buffer holds the full message before processing it, so the buffer grows without limit. Peer connections are unauthenticated, so any peer in the swarm exhausts the downloading process's memory. The largest legitimate message is a 16 KiB piece block, so any announced length far above that is anomalous. | ||||
| CVE-2026-57079 | 1 Sanko | 1 Net::bittorrent | 2026-07-20 | 5.3 Medium |
| Net::BitTorrent versions before 2.1.0 for Perl write files outside the download directory via path traversal in peer-supplied metadata. Net::BitTorrent validates file path components only on the .torrent-file ingest path. The peer and magnet metadata path (_on_metadata_received, reached from the BEP09 ut_metadata extension) passes attacker-supplied file names straight to Storage::add_file and Storage::_parse_file_tree, where Path::Tiny's child() does not collapse "..". A v2 file tree key, a v1 files[].path element, or a single-file name containing ".." segments therefore resolves outside the download directory. Because the peer also controls the piece hashes and the served bytes, content verification passes, so a malicious magnet or peer writes attacker-chosen content to an attacker-chosen path on the downloading host. | ||||
| CVE-2026-15529 | 1 Yzhao062 | 1 Pyod | 2026-07-20 | 6.3 Medium |
| A vulnerability was detected in yzhao062 pyod up to 3.6.1. Affected is the function pyod.utils.persistence.load of the file pyod/utils/persistence.py. Performing a manipulation of the argument path results in deserialization. The attack can be initiated remotely. Upgrading to version 3.6.2 is able to address this issue. It is recommended to apply a patch to fix this issue. The pull request to fix this issue requires some minor changes. | ||||
| CVE-2023-0567 | 2 Php, Redhat | 2 Php, Enterprise Linux | 2026-07-19 | 7.7 High |
| In PHP 8.0.X before 8.0.28, 8.1.X before 8.1.16 and 8.2.X before 8.2.3, password_verify() function may accept some invalid Blowfish hashes as valid. If such invalid hash ever ends up in the password database, it may lead to an application allowing any password for this entry as valid. | ||||
| CVE-2026-63838 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: rsnd: Fix potential out-of-bounds access of component_dais[] component_dais[RSND_MAX_COMPONENT] is initially zero-initialized and later populated in rsnd_dai_of_node(). However, the existing boundary check: if (i >= RSND_MAX_COMPONENT) does not guarantee that the last valid element remains zero. As a result, the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero, which may lead to an out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-63837 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Check return code before setting timestamp output ena_phc_gettimex64() is setting the output parameter regardless of whether ena_com_phc_get_timestamp() succeeded or failed. When ena_com_phc_get_timestamp() returns an error, the timestamp parameter may contain uninitialized stack memory (e.g., when PHC is disabled or in blocked state) or invalid hardware values. Passing these to userspace via the PTP ioctl is both a security issue (information leak) and a correctness bug. Fix by checking the return code after releasing the lock and only setting the output timestamp on success. | ||||
| CVE-2026-63836 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: avoid divide-by-zero for dec_cwnd The cwnd is always MSS <= cwnd <= 0x20000000. But the calculation in batadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics. ((mss * 8) ** 2) / (cwnd * 8) In case cwnd is actually 0x20000000, it will be shifted by 3 bit to the left end up at 0x100000000 or U32_MAX + 1. It will therefore wrap around and be 0 - resulting in: ((mss * 8) ** 2) / 0 This is of course invalid and cannot be calculated. The calculation should must be simplified to avoid this overflow: (mss ** 2) * 8 / cwnd It will keep the precision enhancement from the scaling (by 8) but avoid the overflow in the divisor. In theory, there could still be an overflow in the dividend. It is at the moment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not an imminent problem. But allowing it to use the whole u32 bit range, would mean that it can still use up to 67 bits. To keep this calculation safe for 32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits - or in other words: must never be larger than 16383. | ||||
| CVE-2026-63835 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: v: prevent OGM aggregation on disabled hardif When an interface gets disabled, the worker is correctly disabled by batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable(). In this process, the skb aggr_list is also freed. But batadv_v_ogm_send_meshif() can still queue new skbs (via batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all cores can no longer find the RCU protected list of hard interfaces. These queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work. The batadv_v_ogm_iface_disable() function must block batadv_v_ogm_queue_on_if() to avoid leak of skbs. | ||||
| CVE-2026-63834 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: restrict number of unacked list entries When the unacked_list is unbound, an attacker could send messages with small lengths and appropriated seqno + gaps to force the receiver to allocate more and more unacked_list entries. And the end either causing an out-of-memory situation or increase the management overhead for the (large) list that significant portions of CPU cycles are wasted in searching through the list. When limiting the list to a specific number, it is important to still correctly add a new entry to the list. But if the list became larger than the limit, the last entry of the list (with the highest seqno) must be dropped to still allow the earlier seqnos to finish and therefore to continue the process. Otherwise, the process might get stuck with too high seqnos which are not handled by batadv_tp_ack_unordered(). | ||||
| CVE-2026-63822 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath11k_pci), and we get: WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90 Call Trace: free_large_kmalloc ath11k_dp_free ath11k_core_deinit ath11k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. | ||||
| CVE-2026-63821 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: fix memory leaks on USB write failures When rtw_usb_write_port() fails to submit a USB Request Block (URB) (e.g., due to device disconnect or ENOMEM), the completion callback is never executed. Currently, the driver ignores the return value of rtw_usb_write_port() in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because these functions rely on the completion callback to free the socket buffers (skbs) and the transaction control block (txcb), a submission failure results in: 1. A memory leak of the allocated skb in rtw_usb_write_data(). 2. A memory leak of the txcb structure and all aggregated skbs in rtw_usb_tx_agg_skb(). Fix this by checking the return value of rtw_usb_write_port(). If it fails, explicitly free the skb in rtw_usb_write_data(), and properly purge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb(). The issue was discovered in practice during device disconnect/reconnect scenarios and memory pressure conditions. Tested by verifying normal TX operation continues after the fix without regressions. | ||||
| CVE-2026-63820 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix missing read bio submission on large folio error f2fs_read_data_large_folio() can keep a read bio across multiple readahead folios. If a later folio hits an error before any of its blocks are added to the bio, folio_in_bio is false and the current error path returns immediately after ending that folio. This can leave the bio accumulated for earlier folios unsubmitted. Those folios then never receive read completion, and readers can wait indefinitely on the locked folios. Route errors through the common out path so any pending bio is submitted before returning. Stop consuming more readahead folios once an error is seen, and only wait on and clear the current folio when it was actually added to the bio. | ||||
| CVE-2026-63798 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe and sets up chained handlers using irq_set_chained_handler_and_data(). However, on driver removal, the generic chips are not freed and the chained handlers are not removed. The generic chips remain on the global gc_list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, potentially resulting in a use-after-free and kernel crash. The chained handlers that were installed in probe for peripheral and syswake interrupts are also left dangling, which can lead to spurious interrupts accessing freed memory. Fix these issues by: - Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the core code automatically removes generic chips when irq_domain_remove() is called - Clearing all chained handlers with NULL in pdc_intc_remove() | ||||
| CVE-2026-53382 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si syzbot reported a general protection fault in vidtv_psi_ts_psi_write_into [1]. vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does not check for this before dereferencing the returned pointer to access the continuity counter. This leads to a general protection fault when accessing a near-NULL address. The root cause is that vidtv_mux_pid_ctx_init() does not check the return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs. If the allocation fails, the PID context is never created, but init returns success. The subsequent vidtv_mux_push_si() call then gets NULL from vidtv_mux_get_pid_ctx() and crashes. Fix both the root cause (add error check in vidtv_mux_pid_ctx_init for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for all vidtv_mux_get_pid_ctx() calls. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: events vidtv_mux_tick RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197 Call Trace: <TASK> vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline] vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231 vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196 vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408 | ||||
| CVE-2026-30796 | 6 Apple, Linux, Microsoft and 3 more | 6 Macos, Linux Kernel, Windows and 3 more | 2026-07-19 | 7.5 High |
| Cleartext Transmission of Sensitive Information, Insufficiently Protected Credentials vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android (Address book sync, Heartbeat sync loop modules) allows Sniffing Attacks. The client places the preset address-book password verbatim into the heartbeat sync JSON body (src/hbbs_http/sync.rs). Over an intact HTTPS session it is not exposed in transit, but it is a reusable shared secret rather than a zero-knowledge proof, so it is recovered by any party that becomes the API endpoint - under the re-homed/rogue API server (CVE-2026-30797) - and the leaked credential then authorizes the server-side address book. This vulnerability is associated with program files src/hbbs_http/sync.rs and program routines heartbeat sync body builder (emits preset-address-book-password). This issue affects RustDesk Client: through 1.4.8. | ||||
| CVE-2026-53379 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov8856: free control handler on error in ov8856_init_controls() The control handler wasn't freed if adding controls failed, add an error exit label and convert the existing error return to use it. | ||||
| CVE-2026-53371 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: bound node_desc sysfs read with %.64s node_desc[64] in struct ib_device is not guaranteed to be NUL- terminated. The core IB sysfs handler uses "%.64s" for exactly this reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store() performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL termination: memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX)); If exactly 64 bytes are written via the node_desc sysfs file, the array contains no NUL byte. The ionic hca_type_show() handler uses unbounded "%s" and will read past the end of node_desc into adjacent fields of struct ib_device until it encounters a NUL. ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by userspace. Match the core handler and bound the format specifier. | ||||