Export limit exceeded: 48421 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (48421 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72348 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop The ah, hbh and rt matches check that the fixed extension header is present, then use the header length field to derive the advertised extension header length for matching. For the ah match, add the missing advertised-length check. For hbh and rt, update the existing advertised-length checks. In all three cases, set hotdrop to true before returning false when the advertised extension header length exceeds the available skb data. Returning false treats the packet as a rule mismatch. Set hotdrop to true and drop malformed packets so they cannot bypass rules intended to drop packets with these IPv6 extension headers. | ||||
| CVE-2026-72360 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays Currently defined VF/PF relay actions use regular REQUEST messages only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT messages as this would result in breaking the VFPF ABI protocol and also might trigger an assert on the PF side. (cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a) | ||||
| CVE-2026-72367 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iomap: guard io_size EOF trim against concurrent truncate underflow iomap: fix zero padding data issue in concurrent append writes changed ioend accounting so that io_size tracks only valid data within EOF. This trims io_size when a writeback range extends past end_pos: ioend->io_size += map_len; if (ioend->io_offset + ioend->io_size > end_pos) ioend->io_size = end_pos - ioend->io_offset; However, if end_pos ends up below ioend->io_offset, the subtraction becomes negative and is stored in size_t io_size, causing an unsigned wrap to a huge value. This can happen when writeback continues past byte-level EOF up to a block-aligned range, or when a concurrent truncate shrinks the file after end_pos was sampled in iomap_writeback_handle_eof(). A wrapped io_size can mislead append detection and corrupt completion-time size handling, since filesystem end_io paths consume io_size for decisions such as on-disk EOF updates and unwritten/COW completion ranges. Fix this by clamping io_size to zero when EOF has moved to or before the ioend start offset. This preserves the original intent of trimming io_size to valid in-EOF data while avoiding the underflow. | ||||
| CVE-2026-72406 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available. | ||||
| CVE-2026-72400 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: seg6: validate SRH length before reading fixed fields seg6_validate_srh() reads fixed SRH fields such as srh->type and srh->hdrlen before checking that the supplied length covers the fixed struct ipv6_sr_hdr fields. The BPF SEG6 encap path reaches this with a BPF program-supplied pointer and length: bpf_lwt_push_encap() and the SEG6 local BPF END_B6 and END_B6_ENCAP actions call bpf_push_seg6_encap(), which forwards the length to seg6_validate_srh() with no minimum-size guard. A 2-byte SEG6 encap header can therefore make the validator read srh->type at offset 2 beyond the caller-supplied buffer. Reject lengths shorter than the fixed SRH at the top of seg6_validate_srh(), before any field is read. This fixes the BPF helper path and keeps the common validator robust. | ||||
| CVE-2026-72417 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: Validate iph->ihl in nf_flow_ip4_tunnel_proto() Add sanity check for iph->ihl field in nf_flow_ip4_tunnel_proto() before using it to compute the header size, avoiding out-of-bounds access with malformed IP headers. While at it, use iph->protocol instead of the hardcoded IPPROTO_IPIP constant when setting ctx->tun.proto and reference ctx->tun.hdr_size when updating ctx->offset. | ||||
| CVE-2026-64531 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reject oversized nested action attrs Open vSwitch stores generated flow actions as nlattrs, whose nla_len field is u16. Commit a1e64addf3ff ("net: openvswitch: remove misbehaving actions length check") allowed the total sw_flow_actions stream to grow beyond 64 KiB, which is valid, but also removed the last guard preventing a generated nested action attribute from exceeding U16_MAX. An oversized generated container can thus be closed with a truncated nla_len. A later dump or teardown then walks a structurally different stream than the one that was validated. In particular, an oversized nested CLONE/CT action may cause subsequent bytes in the generated stream to be interpreted as independent actions. Keep the larger total-action-stream behavior, but make nested action close reject generated containers that do not fit in nla_len, and return the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse construction order before discarding failed wrappers, so resources copied into the rejected tails are released before the wrappers are removed. Most failed outer wrappers are discarded by truncating actions_len after child resources have been released. CHECK_PKT_LEN also trims its parent after branch resources are gone. SET/TUNNEL close failures unwind their known tun_dst ownership directly, and SET_TO_MASKED has no external ownership and truncates on close failure. | ||||
| CVE-2026-16933 | 1 Ibm | 1 Power Systems Firmware | 2026-08-22 | 8.2 High |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 through OP940.81 (Power HMC) is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can read and write arbitrary regions of host system memory, giving full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact. | ||||
| CVE-2026-16661 | 1 Ibm | 2 Power Systems Firmware, Powervm Hypervisor | 2026-08-22 | 8.2 High |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the service processor mailbox interface. An attacker with authenticated service-level access to the FSP can exploit this vulnerability, allowing arbitrary code to be executed in the host firmware runtime, giving full control over the managed system, resulting in a confidentiality, integrity, and availability impact to the managed system. | ||||
| CVE-2026-72446 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: reject stream disable with no active interface handle_uaudio_stream_req() resolves an interface index with info_idx_from_ifnum(), which returns -EINVAL when no interface matches. The enable branch and the response: cleanup label both guard against a negative index, but the disable branch does not: it forms info = &uadev[pcm_card_num].info[info_idx] and dereferences it. uadev[].info is a pointer allocated only when a stream is first enabled, so a negative info_idx on the disable path is unsafe in two ways: - If the card was never enabled, .info is NULL and &info[-EINVAL] is a wild pointer; reading info->data_ep_pipe faults (kernel oops). - If the card was enabled at least once (.info allocated) and the disable names an interface that does not match, &info[-EINVAL] points before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte write (both pipe fields are cleared to 0). That is memory corruption, not just a NULL dereference. The request is reachable from unprivileged local userspace over AF_QIPCRTR. Reject a disable request with no resolved interface, matching the guard the enable path already has. | ||||
| CVE-2026-72450 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: validate selector family and prefixlen during match syzbot reported a shift-out-of-bounds in xfrm_selector_match() due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set). Fix this by: - Rejecting mismatched families in xfrm_selector_match. - Returning false in addr4_match if prefixlen > 32. - Returning false in addr_match if prefixlen > 128 (prevents overflow). | ||||
| CVE-2026-72466 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix bcall rep leak and unbounded peek rpcrdma_is_bcall() decodes a reply's first words to decide whether the frame is a backchannel call. Two issues in that decode path let a short or malformed reply leak the receive buffer and drain the Receive queue. First, the speculative peek p = xdr_inline_decode(xdr, 0); /* five p++ reads follow */ asks xdr_inline_decode() for zero bytes, which returns xdr->p without consulting xdr->end. The five subsequent __be32 reads can then walk up to 20 bytes past the wire payload into stale regbuf contents and misclassify the reply as a backchannel call. Second, after the post-peek p = xdr_inline_decode(xdr, 3 * sizeof(*p)); if (unlikely(!p)) return true; the short-header arm returns true without calling rpcrdma_bc_receive_call(). The contract with the caller is that a true return transfers ownership of rep to the backchannel path: rpcrdma_reply_handler() if (rpcrdma_is_bcall(r_xprt, rep)) return; /* bare return, skips out_post */ ... out_post: rpcrdma_post_recvs(r_xprt, credits + ...); Because rpcrdma_bc_receive_call() never ran, no one took rep, but rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put() and rpcrdma_post_recvs(). The rep, with its persistently DMA-mapped receive buffer, is orphaned on rb_all_reps and freed only at transport teardown. This completion reposts nothing, so its slot is reclaimed only when a later forward-channel reply reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to backfill; absent that traffic the Receive queue drains and the peer's Sends draw RNR NAKs. Fix by consulting xdr->end after the zero-length peek so the five __be32 reads cannot run unless 20 bytes of wire payload remain. A byte-precise comparison against xdr->end is required because a non-4-aligned receive rounds the stream's word count up past the true payload. Also return false from the short-header arm so the reply falls through the normal out_norqst cleanup chain (rpcrdma_rep_put() plus rpcrdma_post_recvs()). | ||||
| CVE-2026-72480 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling ams_event_to_channel() may return a pointer past the end of dev->channels when no matching scan_index is found. This can lead to invalid memory access in ams_handle_event(). Add a bounds check in ams_event_to_channel() and return NULL when no channel is found. Also guard the caller to safely handle this case. | ||||
| CVE-2026-72488 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: fix bug in sdw_add_element_group_count found by syzkaller The original implementation caused an out-of-bounds memory access in the sdw_add_element_group_count for-loop when i == num. for (i = 0; i <= num; i++) { if (rate == group->rates[i] && lane == group->lanes[i]) ... To fix this error, the function now checks for existing rate/lane entries in the group(a function parameter) using a for-loop before adding them. No functional changes apart from this fix. | ||||
| CVE-2026-72478 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: add bounds check to run_get_highest_vcn() run_get_highest_vcn() parses a packed NTFS mapping-pairs buffer without any length bound, relying solely on a 0x00 terminator to stop. A crafted $LogFile UpdateMappingPairs record whose embedded attribute contains mapping-pairs runs without a terminator causes the function to read past the slab allocation, triggering a KASAN slab-out-of-bounds read on mount. The sibling function run_unpack() received an analogous bounds-check in commit b62567bca474 ("ntfs3: add buffer boundary checks to run_unpack()"), but run_get_highest_vcn() was missed. Take a run_buf_size parameter and reject any run header whose payload would extend past the buffer end, mirroring the pattern used by run_unpack(). The caller in fslog.c passes the remaining attribute bytes after the mapping-pairs offset. KASAN report (on mainline v7.1 merge window HEAD): BUG: KASAN: slab-out-of-bounds in run_get_highest_vcn+0x3c0/0x410 Read of size 1 at addr ffff88800e2d5400 by task mount/72 Call Trace: run_get_highest_vcn+0x3c0/0x410 do_action.isra.0+0x3ba8/0x7b50 log_replay+0x9ddd/0x10200 ntfs_loadlog_and_replay+0x4ad/0x610 ntfs_fill_super+0x214a/0x4540 | ||||
| CVE-2026-74457 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). | ||||
| CVE-2026-74466 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. | ||||
| CVE-2026-74258 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard __get_user acesss with access_ok for uprobe_multi data As reported by sashiko [1] we need to use access_ok to check the user space data bounds before we use __get-user to get it. [1] https://lore.kernel.org/bpf/20260610145235.CB1441F00893@smtp.kernel.org/ | ||||
| CVE-2026-74269 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: fix head underflow on XDP head-grow The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on a bnxt machine (and also crashes in NIPA). It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which builds the skb head: napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size); The problem with this expression is that in page mode, rx_offset is: bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM; Which evaluates (at least on x86_64) to 258. The test test_xdp_native_adjst_head_grow_data tests a case where the head is adjusted by -256. When this test runs, data_ptr is shifted to frag_start + 2 (where frag_start = page_address(page) + offset). Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb expression subtracts 258, landing at an address before frag_start. This could be either the previous fragment or the previous physical page when the offset is < 256 (e.g. if the fragment started at offset 0). When the skb is freed, the page pool fragment reference is dropped on either the wrong page or the wrong frag of the right page. In either case, the corrupted reference count can lead to the page being prematurely recycled while still in use. Once (incorrectly) recycled, it can be handed out again and on driver teardown this would result in a double free. The commit under fixes updated this code to handle the case where the native page size is >= 64k, but it unintentionally broke the head grow case. To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on allocation and preserve it on reuse. In bnxt_rx_multi_page_skb, use the newly added offset field to compute the fragment start and pass that to napi_build_skb. Adjust the layout with skb_reserve. There are two cases, the non-adjustment case and the adjustment case. In both cases, the skb is built at page_address(page) + offset to account for the case where the native page size >= 64K and skb_reserve is called with data_ptr - (page_address(page) + offset). That difference equals bp->rx_offset when data_ptr was not moved, or bp->rx_offset + xdp_adjust when XDP adjusted the head. Re-running the failing test with this commit applied causes the test to run successfully to completion. The other rx_skb_func implementations don't have this issue. | ||||
| CVE-2026-74275 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach() In cxl_cancel_auto_attach(), it assumes cxled->pos is a valid index for accessing p->targets[]. However, cxled->pos can be set to negative errno in cxl_region_sort_targets() if cxl_calc_interleave_pos() fails. This causes the driver to use a negative index to access p->targets[], resulting in out-of-bounds access. Fix it by walking p->targets[] instead of using cxled->pos directly. | ||||